EAG Stubby Front Bumper W/LED Lights & Winch Plate Fit for 07-18 Wrangler JK

The hardest part of installation was removing the old bumper. Installed it on a 2007 Jeep wrangler and it bolted on with little effort. Put a 1200 pound rated winch on it, the winch bolted on perfectly and it gave just enough room to tuck the wiring behind it and up into the engine compartment. The pre installed LED fog lamps plugged right into the existing harness and works fine with out any adapter. I switched out the regular headlight bulbs with a set of LED bulbs so that the white lightning would be uniform on all lights. It came packaged wrapped heavily in foam without as much as a scratch. The powder coated finish thickness seem just right ( too thick it will be prone to chipping, too thin it will rust) All in all I couldn't be happier.

The bumper came very well wrapped up in the box. All corners and D-Ring mounts had rubber pieces on them to keep from getting dinged up. Came with all hardware, Fog Lights & Wiring Harness, D-Rings and fog light inserts (Yellow, Red and Silver). Because I had on after market bumper on the Jeep, I did not have the original mounting points for the bumper. Not to big of a deal, just re-drilled holes into the bumper and mounted thru the frame. Fog lights are good, but not very bright, but also not a big deal. I did not have OEM fog lights, so they got hooked up to my switch board (they also come with a switch). Also, would have been nice if you had the option of bare metal. I had to sand down the black powder coat so that I could match paint with Rocker Knockers and Rear bumper. All in all, great product.

This bumper came to me and was so easy I had my 2 daughters install it. I even put a 10,000 capacity winch on it and pulled a car sideways that had all flat tires and the bumper didnt even have pull marks.The only gripe I have about this bumper is the fact the LED lights it comes with is 100% horrible. I would of rather had the bunpernfor $20 less without the lights.

I love this bumper. I only use my Jeep as a weekender so I’m not as concerned about there not being a place for the license plate but it is something to consider if your Jeep is a daily driver.

Hardest part was taking off the Stock bumper!!! Installed with the help of a friend 2 hours total most was removing the stock bumper

You can’t use the stock fog lights or use a after market brackets because the holes are oval and you have to use an adapter for the lights if you want to use your stock wiring harness, and they don’t have a skid plate that fits this model

It's a good cheap bumper upgrade. The only thing I don't like is factory fog lights won't mount in the brackets. However you could easily make them work if you wanted to build a bracket, or just zip tie them in.

Bumper came nicely packed, and look's great. The only reason I gave it 4 stars on how easy it was to install was because the mounting bolts didn't line up with the factory holes on the jeep. Easy fix with a step bit.