Caldwell Magazine Loader for Multiple Calibers, Single and Double Stack, for Range, Shooting, and Outdoors

This is perfect, it works so well.It's amazing that something so simple could work so quickly and so effectively.

Works great , even with .45 shells. I don't see why others are having so many problems. Also , if your mag is polymer you will have some slag from the molding process and it will knock the slag off and appear to be damaging the mag when it's not. A child could use this loader.

I had to accept the fact that I am getting older. I can still load broken-in mags, but new ones present a bit of pain. I have the ironically named “Trigger Finger” problem in my right thumb, and that doesn’t help at all. With this loader, I load faster than I could with the non-mechanical kind. You just have to work with it for a while to figure out how it works best. I like that the magazine size adjustments are premarked for M9 mags, since it works best with different size numbers for the left and right sides. One of my pistols uses the same magazine I believe that reviewer Adrienne F. pretty much summarized what I think of the product. The item is plastic, but it is well-built and functions well, too. The instructions could be a little clearer. You have to make sure that the mag is seated all the way down, and that it is in there tightly. I had better luck inserting rounds with my left hand and squeezing with my right (I’m right-handed). I’m sure you could just reverse that for left-handers. I’ve included pictures of how I insert the rounds. I would recommend this for anyone who has trouble loading mags.

I got this for my arthritis to use with ease. Feels ok but it's a plastic loader. I am using my double stack 9mm for Springfield Hellcat RDP to load. I found the settings that fits correctly to hold the magazine in place and I had the hardest time with the first bullet. The magazine kept pushing up. Finally I manually put one bullet in magazine and loaded up the magazine in the speed loader. Second bullet goes in with no issues at all. Third bullet goes in but had to use a stronger grip. Fourth bullet did not want to go in and the magazine kept pushing out I went to YouTube to figure out what I'm doing wrong because the instructions were not the greatest with its pictures. Seeing how the videos show this loader to be used very easily, I emptied the several bullets to try again. Still the same issues. I read reviews and a lot of people are having the same issues as I am. I haven't tried my other types of magazines yet, to be fair, so I don't know if it is difficult because its a 15 round double stack and the spring tension is very tight or if it's just the reason of brand of magazine. Videos show this loader to be done with a simple squeeze... but my wrist is definitely hurting from trying to load bullets in the mag. I'll do a follow up and will decide if I will return it or keep for my other magazines that it could work with.

This is a godsend for my old decrepit fingers and thumbs! Is it perfect? No. Is it glitchy? Somewhat. Anyway, here's my observations: It helps to have a little mechanical aptitude in order to trouble shoot any small difficulty. Plus, find the routine that works best for you. Rather than shaking, try finger stirring the bullets to guide them and fill the trough. I don't use many more bullets than what's needed. A full bin gives bullet movement in the trough fits. When the knob doesn't turn with the usual pressure, don't try to force it. Rather, remove the mag and make any needed realignment. Trying to force the knob only dings the soft brass shell casing. BTW, minor shell dings with 22lr rounds are mostly inconsequential (IMHO), but they aren't desirable. Watch to see that the bullets are moving down as the knob is turned 1/2 rotation at a time. If bullets stop moving and the knob turns loose, once again stop, remove the mag and check things. Be sure to fully seat the magazine into the loader. The release latch should spring up. Anytime a mag is detached from the loader, loose bullets need to be removed from the loader's magazine well. Give loaded mags a rap in the back, as sometimes the loader leaves bullets just shy of fully seated. All my Ruger 10/22 magazines (standard 10rd and BX extended) require one round manually seated prior to using the loader. However, my Butler Creek extended mags are good to go when completely empty. Be ready to buy more 22lr. With this gadget, you can expend a lot of ammo!

This loader kind of does its job—but just barely. It might save your thumbs a bit, but the trade-off is ammo getting stuck or misaligned. When loading a 25-round mag, you might save 5 seconds tops. The construction feels decent, but the functionality just isn’t there to make this a must-have. It’s okay as a backup tool, but I usually just go back to hand-loading.

Although the instructions are a bit confusing, or incomplete, it didn't take long to figure out how this works. You put the cartridge in and adjust the two side holders to snug the cartridge in place. I found it easier once I figured out which numbers to snug my cartridge, I took the cartridge out and used my fingers both inside and outside to spin the two snuggers on each side and then used the screw handle to tighten the cartridge down. You can only load one bullet at a time and consider when you do to squeeze the handle ALL the way to shove the bullet in place. Hope this helps!

I saw all the mixed reviews, and was unsure about buying it, but when it went on sale for $13, I figured it was worth a shot... and boy am I glad I took the chance! It is extremely effective at loading 10/22 rotary magazines, and it WILL work on extended mags. It can be fussy, but like some others have posted, there are a few tips to make it virtually fool proof: 1- For the best results, especially when using lead rounds (like most of us do for plinking,) get some silicone spray lubricant, and give a few quick, even sprays into the hopper. Use a paper towel to distribute it evenly, then let it dry completely before using it the first time. This creates a dry film of silicone that will let the rounds slide around much more freely while reducing the buildup of wax from cheaper rounds. I did the lube after my first time using it, and it makes a HUGE difference. 2- As others have mentioned, put the magazine in first. THere is nothing preventing the rounds from sliding into the magwell, which will cause a jam. 3- Despite the advertising and manufacturers suggestions, this will absolutely load extended magazines just as well. I have 2 clear 25 round hot lips mags from Butler Creek that load beautifully. The trick is to follow the previous steps, and also make sure that once the mag is loaded in, you give it a little extra pressure into the loader. This little bit extra prevents jams and makes loading smooth as butler....I mean butter. 4- Don't overfill the hopper. You are never going to get the feeding line full, and having too many rounds in the hopper can cause some issues getting the rounds to the feeder. 5- Be watchful of where the feeding line goes under the plastic shelf in the hopper, as the rim of the cartridge can get hung up. Pay a bit of attention to that, and you'll be fine. This honestly seems like a lot, but once you get the hang of it, it makes loading .22 mags so so so much easier. Believe me, if you can get it for less than $20, it's well worth it, and your thumbs will thank you. p.s. I'll do my best to get a video tutorial added to my review as soon as my father returns my wildcat lol.