HUYUN Generic Mouse Skatez & Mouse Feet & Mice Feet & Mouse Skates & for Logit G102/G PRO Gaming Mouse(Come with 2 Sets)

Only replaced two skates that were damaged from an earlier operation. Months ago, I opened up a Logitech G203 mouse that stopped working and found that a cable had fallen out somehow. Plugged the cable inside back in firmly and it started working fine again, and continued to use it for many months, however, I damaged the front pair of feet which had to be removed to open the mouse. I put up with it until recently when the smooth coating wore away too badly, and ordered these.They came with a microfiber cleaning cloth, a sealed pair of alcohol wipes, a mini catalogue and the feet themselves. These are not the type that you place on top of existing, worn out mouse feet; they are full replacements. I removed the old, defective feet from the G203, cleaned the bottom with the wipe and cloth, carefully removed and applied the feet on the mouse, then removed the plastic film that protects the gliding mouse feet until use. Done. They look good, work quite well, and the mouse glides on the mouse pad like butter.Do you need precision tools for the install? I wouldn't say so, but it can be hard to keep an upside-down mouse from moving around while you try to carefully apply a tiny bit of plastic to it. Thankfully you get two sets of the things in case you mess up.Now, I didn't apply the pads on the other side nor on the center support, since those were worn, but still functional. Applying the ring-like center pad would probably be the most tricky, but if you're just looking to replace the oval pads on the four corner areas, these are simple to apply and a cheap way to refresh a G203 that is starting to have issues dragging on your mouse pad. Five stars.

A few months back I bought 2x extra G502s when they were on sale to have as backups. Unfortunately I didn't open them for several months, and when I did I realized BOTH had pads that were applied horribly during manufacturing, but it was too late to return them. I bought these to replace them, and they were a lifesaver.They're pretty easy to apply, though if you want them perfect it does take a bit of patience and precision. Once applied they're just as good as the stock ones in terms of feel and glide. Only been using them for about 2 months, so not sure about longevity, but I imagine they'll last just as long as the stock ones as well.Couldn't be happier with this purchase.

Fits g502 perfectly and takes about 2 minutes to apply at most.

My stock mouse feet/skates on my G502 were getting worn down and were not smooth anymore (likely the lip around one of the skates was hitting. This seems to have good reviews so I went for it.As a note, when replacing mouse feet, if it goes like it did on my G502 it is a one way street. To remove the old feet is destructive to them (likely had I used an air dryer to heat it up that might have negated this issue). This was fine for me as my old feet were shot.Installation took maybe 10 minutes which includes removal. I recommend a small pocket knife or tweezers (or both) for removal. Tweezers are handy for applying the new skates. That said it was easy to handle them from the side. All the new skates fit into place super-easy. Getting the cover off the business side of the skates is a must and again only took a few seconds.End result: these new skates a vastly more smooth than stock on my Logitech G502. It is night and day. We'll see how long they last, but given the low quality stock on an aluminum mouse pad lasted 2+ years I expect no less and they fell more substantial. This is also a two pack so when that day comes, you're covered one more time.

My G502 Hero wired mouse had started snagging my mouse pad. Turns out one of the skates had started lifting in the corner, not sure how, but no matter how often I tried to push it back down it wouldn't stay down and would again start snagging. I decided to get new ones and these seemed like a good deal with good reviews.I got them quickly as expected with Prime shipping and went about putting them on. Taking the old ones (OEM) off didn't seem like a difficult task, but when I went to use the alcohol swab to remove the residual glue I realized my OEM pads had actually come off in half. I had to spend a little bit of time scraping the rest of the pad off the bottom of the mouse but eventually it all came off and I was able to clean the plastic with the included alcohol swabs.After I had gotten all the old pads off, the new ones were fairly simple to put on as long as you aligned them correctly. One was a little triangle and I took some time to figure out the correct orientation, but once I was able to put them all down and press a little bit on them they all stuck very well. There is a bit of film on the sliding side that you have to get off. I did it after sticking them on and didn't have any problems.Now my mouse slides great and no longer snags the mouse pad. If in the future it does start to snag again or something I do now also have a second set to replace with again.I can't remember if it was these or another set but a commenter complained about the color not being a match with the mouse. Mine seems to be fine (see picture)

Nice and easy put on

Granted I've personally never swapped the pads on the bottom of a mouse before. But I recently had to swap switches inside and it required me to pull the pads off to get access to the screws. So I decided to go ahead and order replacements since the mouse is rather old anyways.Aside from the fact that there's two sets in this kit, they supply all the cleaning supplies needed.But onto the performance. Like I said, i've never personally done aftermarket pads on a mouse but these feel incredible! Super smooth gliding across my mousepad. They're nice and thick so they sit your mouse up just enough to glide on nothing but the pads. The Adhesive on these is pretty strong too! I used a little heat to remove them and they had enough tack to EASILY go back on!100% recommend these, made my g602 look good as new again!