Nordlichter Ultra Bright 9007 (Hi/Low) LED Headlight Bulbs,ZES Chips Conversion Kit,8000 Lumens 6000K Cool White

I have a 2014 tundra Sr with the halogen reflector housings. As most tundra owners know the stock headlamps leave a lot to be desired. Install was fairly simple but not the quickest. Get your 10mm socket out and remove the four bolts that hold the grille. Pull the grille out one corner and a time. Then remove the push pins in front then the two bolts in the wheel well then the panels below the lights will come off. Remove the two bolts per headlight then pull the headlight down and rest it on the bumper.Remove the h4 connector then the dust cover then slide the wire holder out from the groove and push it away from the bulb.Remove the bulb. Take the new led light and twist the hard plastic plate off the light and insert it in the housing. Push the wire holder in the plate and slide it in the groove. Put the dust cover back on firmly then put the light in and twist. Connect the light to the OEM connector. Mock up the headlight and test. The rest of the install is reverse of the dismantling.Now for the lights. Beam pattern is sufficient. Extremely bright but slightly scattered. I haven't been flashed yet though. Fan is quiet. Lights seem well made. Remember to install the lights so the metal cup over the LEDs has the opening facing up. I'll update with pictures and later with longevity. Btw, no flickering. Lights turn in instantly with full brightness. Happy so far.Edit..about one week later. Lights still bright. Tundra owners drop your headlights down to 2. Helps with the scatter there blinds drivers.

Your browser does not support HTML5 video.  This review is for Toyota Camry 2017 SE. I will give this a good rating. My only issues is the light throw wasn’t very far and the flickering effect on my high beams 9005. A little spotty not that bad. The cut for the lights are very clear but the beams are aimed low. I need to at least be able to the read the license of a vehicle in front of me. The low aims towards the lower part of the tag. Again, not bad for the price.

I installed these in a 2006 Honda Pilot and had no problem installing them. It is bright as promised and much much better than a halogen lamp. Am just observing how long these would last and hoping that it would for 50,000 hours as guaranteed.

First time I turned them on I was like wow.The amount of light vs standard halogen is awesome.Somehow it lights up street signs miles away but doesn't have enough glare to distract oncoming traffic.I recently went through some crazy back roads are night in the mountains of Tennessee and was super glad to have these bulbs.So far I have installed them in my 98 ford Econoline van and a 2000 Mazda b3000 (Ford ranger) truck.I will be installing them in all my cars from now on.I believe anything any brighter would blind oncoming traffic.These work very well in reflector (older) style headlights.There is almost no light scatter that you get with cheaper led headlight bulbs.Im not being paid to say this I pay full price,they are just that awesome.Install is a PIA untill you figure it out then it's like ....oh.

Can definitely tell the difference in projected light field from the headlight reflector on my Yamaha FZ-07 (multiple light points due to multi diode use), but much brighter and whiter than the stock O.E. halogen bulb. A bonus was the ease of install without separate driver to squeeze in to the headlight housing.

I bought these to replace my Putco 269006W Headlight Kit, that gave up on me after three years. Installation was as easy as plug and play and it is as bright as the Putco headlights. After using LED headlights, you really don't want to go back to stock or halogen bulbs. It seems to be well constructed and the packaging was neat. The only difference with the Putco LED is that the cooling fans are not encased. Also the seller is pretty nice, follow up on sales and will work with you to make sure any issues are resolved. I also bought Nordlichter Extremely Bright 8000 Lumens 9005 for my 09 Toyota Corolla. For some reasons, when I installed the 9005, it kept flickering when I'm driving (DRL), but was fine with high beam. I contacted seller and Jennifer promptly responded with a solution and they sent me a 9005 decoder to resolve this issue.

This is my second set of Led Headlights. The first set failed. The first set was a different brand and they were not as bright as the Nordlichter brand. I'm considering buying them for my second car as well as a High beam set for my car. You can see clearly on a dark rainy night.

Instruction said just plug it in, was too loose to stay in either headlight of my Ford. The existing retaining collar which the video's said to discard were too small to accept the fan end. Had to cut the retaining collar in half so the fan would fit behind it and used the collar to secure the bulb, then okay, all good. Fan is good to drain the excess heat buildup. Wish I had known about the fit-up problem but it was easily solved. Light is good, I just want it to be DOT legal, not blind people off the road and it does that fine. Good value for the money