50071 Adapter Cable, SCART to VGA, Black, 2 m Cable Length

So, I read the reviews here and it seemed very mixed at best. I figured it's probably meant for a very specific use case and nothing else. It sounds like maybe it's wired for a very specific model of projector. It definitely wasn't right for what I needed, but it also wasn't that far off, either.My use case was to take an RGBS scart output and connect it to a magewell aio capture card, which takes vga or rgbs over its vga connector. If you're using RGBS, you send the sync over the "h-sync" pin. This actually seems to be a pretty standard scheme among devices which support both, they typically take H-Sync or C-sync from the same input, with V-Sync being separate.That said, this cable wasn't wired anything like that. The H-sync and V-sync from the vga connector were connected to a few normally unused pins. And the normal composite video/sync pin was not connected to anything. I suspect whatever this cable was meant to go with was basically using the scart cable to output actual vga and using a nonstandard sync pinout to do so. No matter, all I need to do to fix this was use my small jewelers needle nose pliers, squeeze the tab on the pins from the inside, and swap them around. In my case, I swapped the pin wired to H with the proper pin for C-sync, and simply disconnected V-sync entirely.Also, i did not notice the 5v pin connected to ground as another review said. It looked to be left unwired in my case. In fact, the only real issue was the sync wiring, which was a trivial fix.Overall, it's working exactly as I'd hoped after swapping around those pins. I think they could have seriously used some better description as to what the wiring actually is on this cable, but ultimately what i found is that the vga side has everything hooked up that you'd typically need, it's the scart side which might be off for many people, but its also the side which you can swap around easily without any resoldering.I'd probably only buy this if you have the DIY skills to modify it in the inevitable case that it's not quite right (and chances are high...)

Tried to use the cable for my former DVD to my new TVUsed a PC VGA output to test the proper connection to TV. All good. This cable doesn’t work from the DVD to the VGA input. Looks like that I have the same bad experience as other customers before me.Check out Scart/ Hdmi to Hdmi Video Converter Box 1080p Scaler 3.5mm & Coaxial Audio Out instead.

Trash. Doesn’t work. I ordered 2. Not worth returning.

Ich bin sehr zufrieden. Danke

Tal y como pone la descripción. Funciona bien y no he tenido ningún problema. Es resistente y parecen buenos materiales.Lo usé para una videoconsola antigua.

Sorry, I can't comment on this product because I put it straight into the "spares" cupboard. (This item was superseded when I bought the HDMI to s-video converter which is perfect for the job I wanted it to do.)

Super, je branche mon lecteur de DVD de salon, avec la Péritel, et je branche ça sur un écran d'ordinateur avec entrée VGA.Chez moi ça marche, il paratrait que ça n'est pas toujours le cas ? Ah bon... ça doit dépendre du signal, si c'est du vidéo ou du RGB etc.

bonjour bonne qualité