Fractal Design Meshify S2 - Mid Tower Computer Case - Airflow/Performance - 3x Silent Fans And Nexus Hub - PSU Shroud - Modular interior - Water-cooling ready - USB Type C - Blackout Tempered Glass

I upgraded from a Fractal R5 to this and my thermals are at least 5c cooler across the board due to the increased airflow from the mesh front and top. I have 4x intake and 4x exhaust fans on my case, which means that when gaming, or mining, the fan noise is higher than usual but it'll also be louder, in general, for anyone simply due to the lack of solid panels where fans are placed - so keep in mind that this isn't going to be a quiet case.It was super easy to build in, with tonnes of space and lots of cable management options too - and a fan controller in the back!It's super stylish, great build quality, and fantastic airflow. I'm very happy with this purchase and would highly recommend it to anyone looking for a cooler PC with the looks to match.

This case is extremely large, but that's what i like the most about it. Has lots of space for the largest radiator, and longest GPU. I have an Arctic Freezer II 420 radiator on top and an RTX 3080ti and they look small inside this beast. This case is very well made, looks great, has so much room for basically any PC component you want to put inside it. The included case fans are actually pretty decent also, decent flow of air, and not loud. The tempered glass side panel is very nice also as it allows you to show off all the lovely RGB lighting that you might want to have inside. :-)

Well constructed case with multiple build options depending on components used. Lots of room inside for CPU air coolers, fitted an arctic freezer 34 duo no problem and extra long graphics cards catered for. Multiple options for 120/140mm fans and radiator mounting and I personally like the darker side glass panel. The case was easy to build in and cable management options are very good. This is the 2nd Fractal case I have owned coming from an ARC midi tower from a good few years back. Design, build quality and the overall look of Fractal Design case is good.

The case is nice to look at with excellent airflow. easy to clean. comes with a fan controller hub to run multiple fans from a single PWM header.probably the last case I'll ever need to buy so long as the ATX standard keeps going.the problem: two screws were done up so tight I had to drill them out. the screw that secures the removable panel at the front of the PSU shroud. (lower front of case) and then the screw that holds the little shroud on top of the vertical PCI slot.I think they might have been powder coated in place. Not sure but either way there was no reason for them to be so tight!now I've finished my build im happy but it was a lot of extra work and swearing while drilling out those screws and then cleaning out the metal filings.

Best case I've worked in so far. Lots of room for doing stuff. Lovely to work in. However, there's a few minor notes, and issues.Notes:There are two types of thumbscrews. One for the PSU moment and one for everything else. The PSU mount screws only have the thread part way down the shaft. Easy to miss.The mesh on the front panel pops in when you push it. Making it a bit awkward to pick up the case.It takes a bit of practice getting the side panel off without it dropping onto the table. Hold one hand below it on the front side.Issues:The HDDs can be awkward to mount. Difficult to screw the mounting mechanism back into the case. Causing me to not use the top mounting point.The hard drives are mounted on their side. Meaning you have to twist the SATA DATA cable round 90°. Not a huge issue, as the case has enough room. But not ideal.The removable part of the PSU shroud is useless. The whole thing should be removable so that the cables can be accessed.Edit: I hate since realised that it's probably for a water cooling pumpThe front panel is attached by wires. The front IO should be separate from the front panel.

Bought this to replace an ageing Coll Master Case - well constructed and good design for cable management. Plenty of room to support any potential future upgrades like customer water-cooling and the newer larger GFX cards. The stock fans provide good airflow to keep the interior temperatures well within manageable levels. installed a 240 AIO into this case, the the way the top opens up completely, allows for easy access with installing the motherboard, followed by the AIO

Very pleased with this; was simple to build, very nice cable management, and lots of (re)moveable bits to suit whatever set up you require.You have to take some of the drive bays out (and then replace them) to get some of the cable management done for power/reset/USB/front fan/etc., which was a little annoying - I guess the location of these pegs on the MB is not standardised and mine lost that lottery.

It just works.

Un peu cher je trouve.Bonne aération, 3 ventilos fournis, possibilité d'en rajouter un peu partout, perso j'en ai rajouté 2 en top que j'avais en réserve.Je le trouve esthétiquement joli.À noter que les chats se régalent de s'allonger dessus...Config:B550 tomahawk avec un 5600x et un Nokia ND15

Esta es una "torre en condiciones", fabricación sueca, meticulosa, cuidada, con materiales de calidad, y totalmente negra mate, como a mi me gustan. Es una torre muy fresca, está diseñada para un alto flujo de aire y a la vez, está pensada para la refrigeración líquida, tiene mucho espacio y da sensación de robustez.El diseño del panel mesh frontal es innovador, y deja pasar el aire sin obstáculos.. Estaba buscando una torre que recibiera el aire fresco por delante, y expulsara el caliente por detrás, y esta cumple con el cometido.Espacio para hasta 4 SSD y 3 HDD, sin RGB, totalmente negra mate ( dark tint ), aspecto señorial, aunque si le pones ventiladores RGB en el frontal, dejará entrever las luces a través de la malla, lo que da un buen efecto.Lo que más me ha gustado es que lleva una controladora para ventiladores de 3 y 4 pines,por lo que liberas las conexiones de la placa, y te ayuda a conectar hasta 10 ventiladores. Muy satisfecho, estoy súper contento con la compra, y aunque me costó sobre 170€, la verdad es que lo valen. Al ser tan oscura, le pones poca iluminación RGB, y queda espectacular, muy sobria y elegante, es más profunda que alta, y eso le da un toque estético precioso, a mi parecer. Calidad a precio contenido.Recomendable, la volvería a comprar, sin duda.

Cosa mi è piaciuto? il perfetto bilanciamento tra le caratteristiche più importanti di un case. Certo, il prezzo spaventa, parliamo attualmente di 150 euro ed uno ci pensa almeno 2 volte prima di spendere tutti sti soldi. In realtà questo è un prodotto top per i veri appassionati, se pensate a farvi un PC che poi non toccherete per i prossimi 5 anni almeno potete guardare anche ad altri modelli. Perchè ho scelto Meshify S2?1- Cable management: dopo una brutale esperienza con i miei precedenti case, tutte le volte che li aprivo per cambiare un componente o per togliere la polvere, mi spaccavo le dita nel sistemare quei cavolo di cavi. Questo case è la perfezione, innanzitutto offre uno slot PSU molto spazioso e chiuso, così è esteticamente più bello da vedere. Il vano cavi arriva a misurare 3,5 cm di intercapedine, questo consente si far passare in modo agevole numerosi cavi, gli appigli e gli slot HDD/SSD sono studiati per una gestione migliore.2- Airflow: con 2 ventole frontali e la disposizione retro degli HDD/SSD si dispone di un ottimo airflow per il raffreddamento delle componentistiche.3- I filtri antipolvere: finalmente un case che offre protezione totale dalla polvere su ogni lato (sopra, davanti e sotto), così non devo stare lì ogni 6 mesi a doverlo aprire e pulire.Sul raffreddamento a liquido non mi esprimo perchè uso dissipatori ad aria, ma dato l'ingente spazio che concede al suo intero direi che permette varie configurazioni.

Très belle tour, très ergonomique, tous les cables sont facile à passer pour les cacher et il y a beaucoup d'espace pour y mettre ce que l'on veut. Le design est sympa et fait son petit effet.

Un case senza fronzoli e con un design pulito. Lo spazio dentro è tantissimo, l'aria circola e le ventole sono anche molto silenziose. Quando si inizia a lavorarci dentro ci si accorge che non è un giocattolo economico, le lamiere sono di buona qualità ed è pieno di viti e accessori per completare l'installazione. Supporta schede video oltre i 30cm e un d15 di Noctua ci sta senza problemi. Sicuramente Fractal si fa pagare un po di più ma la qualità c'è. Mai più case economici.