Size:1-(Pack) The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.SpecificationsUltimate Tensile and Shear Strength ValuesMediaDrill DiameterBolt DescriptionUltimate Tensile StrengthUltimate Shear Strength1/2" Drywall1/2"1/4"-20 UNC zinc-plated steel265 lb.241 lb.5/8" Drywall1/2"1/4"-20 UNC zinc-plated steel356 lb.324 lb.1/2" Drywall with 25 Gauge Stud*1/2"1/4"-20 UNC zinc-plated steel425 lb.Not available5/8" Drywall with 25 Gauge Stud*1/2"1/4"-20 UNC zinc-plated steel464 lb.Not availableConcrete Block1/2"1/4"-20 UNC zinc-plated steel1,080 lb.Not available*Failure measured as breakage of drywall portion.Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
C**L
Does NOT include the screws
Great product but this particular box does not include the screws.... only the mounting brackets. It would have been nice to know this since the other, smaller packs include the screws. For he money, I would have been better off voting the smaller packs that included the screws. I feel ripped off.
I**!
Oh, Happy Day!
I didn't do my due diligence. I presumed, while viewing the pictures, and that bolts were included with the purchase.I was wrong.That aside, I am well-pleased with the purchase. At 33, I am severely behind the (being a man) curve. Since January 2020 I have been stockpiling on tools, hardware, etc. I'm married now. Can't not know my way around a drill or hanging a heavy picture (right).?.Life won't life me anymore!Leggo!
K**R
Best hollow wall anchor
I have rated these anchors in the past, and I am convinced they are the strongest wall anchors available. This is a metal to metal anchor, superior to the plastic anchors and spring type toggle bolts. Best price is found by buying the anchors in quantity w/o bolts, the bolts can be purchased separately. I use these for mounting safety grab bars in showers when a stud cannot be located, which is often the case.
R**Z
Blows the old fashoned "Wing Toggle Bolt" away...
I have been using these Toggler Snaptoggle Bolts for many years. They are far superior to the old fashioned wing toggle bolts of the past. The bolt bar is a single piece "U" shaped bar which has superior strength over the old 3 piece wing toggle bar. You install the Snaptoggles without the bolts and can bolt and unbolt items as you please. The Snaptoggle will not fall behind the drywall or whatever you are bolting onto.These are great for mounting into cinderblock (hollow) walls as well as drywall with metal studs. They can be used for basic drywall but are somewhat overkill unless you are holding up shelving units with multiple mounting points. For basic drywall anchors use Toggler TC Plastic Drywall Anchors.
F**R
NO BOLTS INCLUDED!!!
The box of Toggler Snaptoggles comes WITHOUT THE BOLTS to make the product function! Without the bolts included, the pricing on this item is suboptimal.If this fact was mentioned in the advertising, it certainly wasn't obvious. I like these anchors and use them often in my Contracting business. Have NEVER seen them offered without the bolts.
A**X
Easy to Use, Great Value
I have used all types of anchors and this is by far the best and highest rated anchor. Be warned these do not come with 1/4-20 bolts, again they are not provided, nor is a 1/2" drill bit provided. I just installed a 160# mirror on 2 anchors and they are holding up great. I will buy again
T**G
No bolts included. Need to read it carefully.
Hmmm. I guess I didn’t read it well enough to see no bolts is included. To buy bolts the price of this is no long that good. It also came mailed in a bag and not in a box as pictured. Will be returning it.
J**R
Great product
These are great once you figure out how to work them. Takes a little bit of a learning curve but once you get it they go in very easily and they hold a lot of weight. Would definitely recommend these
A**R
Good deal
Great price and delivery. Would be five stars if it included the bolts / screws. They are a great product where a heavy / strong anchor is needed.
T**I
great product"
great product"
D**A
Amazing fasteners
Work like a charm. Very strong
User
excellent
Excellent product.
Trustpilot
1 month ago
1 week ago