TTAMPLAR TPC-55D Plasma Cutter, 55Amp Touch Arc Plasma Cutting Machine with 110V/220V Dual Volatage High Frequency IGBT Inverter Clean Cut

The media could not be loaded. I'm actually surprised how small this plasma cutter is.I see it is IGBT Inverter, which is a technology that can get a lot of power out of smaller power supplies.Everything to get started is included in the box. It will run off 120V, but also includes an adapter for 240V.Extra tips are included. Spacers for holding the tip off the cut are not included, but I'm not sure if they are really needed.There are two fans on the back that run all the time. They are not loud at all. The air compressor and torch require I wear hearing protection anyhow.The knobs for Gas Delay and Current have a nice viscous quality feel. They are not easy to bump and stay put.The air regulator fits on the side and has a small tube to reach the back of the unit. The air regulator is high quality with an air cleaner built in. And it includes a pull drain at the bottom to any water out that collects. It is very important to have low humidity in the air feeding the plasma cutter. This regulator helps insure this. It's an easy to pull up and adjust the knob while referencing the pressure gauge on the front. Settings of 55 to 65 seems to be the right pressures for most cutting I will do.The current setting is clear and bright, even in my brightly lighted shop.The torch has a great feel in my hand. There's a simple guard to keep it from accidentally firing. It is simple to flip out of the way to operate the torch.The grounding clamp has a nice copper braid in the middle, helping to assure good contact. It's not too stiff of a clamp, making it easy to adjust and not denting or scratching the panel to be cut.I'm awaiting some electrical work to get 240V to this. I have several projects in mind and feel very good about the potential of this plasma cutter to help in several ways.An excellent high quality plasma cutter making it an exceptional value.

It's hard to believe a machine that cost so little works so well. I tried it on 16ga metal that was painted on one side and rusted on the other and also on 1/4" steel plate. It cut both cleanly and effortlessly. I can't believe I've been messing with cutting disks all this time. Five stars!

...for the price this can't be beat. I'm just getting into welding and have wanted to try a plasma cutter over using cut-off discs and grinders: this is awesome. It's small, very portable, easy to set up and come with every you need out of the box except an air compressor. I've been able to get consumables with ease, and the few questions I've asked of the seller got answered very quickly and in detail. 0 complaints.

This plasma cutter is compact and lightweight. Setup and controls are novice friendly, and it works with 110 volts. Cutting is now way easier with this machine. Quieter than a metal saw, and more versatile. It is so inexpensive, not even HF can beat the price. I’m very pleased.

Got this for the boyfriend as he's been getting into metal work lately and has mentioned getting a plasma cutter before. However, unbeknownst to me was not aware that we needed to have a 220v outlet to get the full power out of it, as well as the fact that his current air compressor is too small at only 6 gallons (he says 20 gallon at minimum for full power). Says both 110v outlet and small air compressor does work with the plasma cutter, but only in short, small bursts on thinner scrap metal he was playing around with and wasn't as much fun at half power. But now that he has this is looking into installing 220v circuit and outlet for it in the garage, and asked for a larger air compressor for Christmas, lol. That said, it seems to be a well built unit given the price point, and came with pretty much everything needed. Only drawback is that it does not have an integrated air compressor.