60A MPPT Solar Charge Controller 12V/24V/48V Auto, 60Amp Solar Charge Controller w/ LCD Display, Support 12(Max) Solar Regulator Connections in Parallel, Work with Lead-Acid and Lithium Batteries

So far works as advertised. Easy to use. I do recommend getting the model without cables. Just easier for wire management.

Used to 12V panels, the use of a 36 volt high power pane changed everything. Only mystery I found is that when you have more panels for low sun conditions, the controller may trip on overcurrent at full sunlight instead of limiting. Really unexpected, but great for the price.

This charge controller worked for a couple of days it performed as expected within the parameters I programmed. one day it just decided to allow all 160 volts from my panels into my system, everything died except the charge controller.luckily My inverter was off that day, my batteries were low that saved the appliance I had plugged into it. Reached out to the seller and they trying to tell me I connected the panels before the battery. Tried explaining that the thing was working fine and I no one was home at the time when it happened but they insist on blaming me. Long story short don’t waste your money. This charge controller is not able to limit or stop excessive voltage if your battery BMS hit over voltage cut off. I have a cheap solar charge controller that holds the voltage even when the BMS trips so I know this powmr is not worth the money. Amazon needs to remove this crap.

I have used these for several years and except for a cooling fan going out on one, I haven't had any problems with these. I almost like the older version better but overall, they do quite well, and their cost is great.

Nice! I recommend this PowMr. 60-amp Charge Controller. This is my Second unit. I've been using one on a 12volt Battery Bank for the past several Months. At 12volts I can Charge my battery bank at 720 watts (12volts times 60 amps = 720 watts\VA). I plan to go to a 24volt, 36volt, and\or 48-volt next. With a 24volt battery bank, this unit can charge at double the 12volt rate, or at 1440 Watts (24Volts x 60Amps =1440watts). If using a 48 Volts Battery Bank, we could charge at 2800 Watts!!! I would note that for a 12volt battery bank, I am limited to 80-volts of solar input, but with a 36 or 48volt Battery bank, this unit can go upto a 160 volt solar array (input). We all know that the higher Voltage is desirable, so we can lower the Amps (and expense in wire size for example) to get all that POWER we all crave. God Bless. I would also note that I was historically using 20 or 30 amp Charge Controllers in the past, and charging my battery bank was much, much slower. However using this 60 Amp charge controller is a large step forward. Get yourself a cheap laser temperature-checking gun (infrared Thermometer), and check the temperature of them there wires, connections, and such when first using, or with any system, to be safe.

Very easy to use and reliable. I've had it for a year in my van.

Really wish it had bluetooth

Bien