ZOOZ800 Series Z-Wave Long Range GPIO Module ZAC93 LR (Use with Home Assistant Yellow or Raspberry Pi)

I wanted to add Z-Wave capabilities to a new Home Assistant home automation solution I was setting up. I had read some horror stories with the USB-based Z-Wave adapters (pro tip if you're using one of those USB-based adapters: for best results, make sure to use at least a 1ft USB extension if you have USB3.0 ports as they have an EMF that can interfere w/the USB-based Z-Wave sticks sometimes) especially with running HA on a docker or VM which I was planning to do on my Synology DS920+ running DSM 7.2 w/Z-Wave JS UI.My perfect device would be PoE to take advantage of my Unifi PoE switch so I started searching. I was stoked to learn that such a device actually exists. There's a device by TubesZB that serves as the interface between a GPIO device just like this and your PoE network switch. Perfect! I ordered one of these, one of those, connected them together and then to my network via the switch, installed Z-Wave JS UI on my HA instance and bam! Magic! It works rock solid and and I've never had a single issue running around 100 Z-Wave devices. Exactly what I was looking for and I'm glad such a thing exists.I'd love to see a single consumer-focused product so you don't have to order from two separate sites and then install things yourself (maybe in the works?) but this really isn't a big deal at all. You quite literally order this Z-Wave GPIO radio and plug it into the TubesZB PoE adapter kit, snap on the cover and plug it in. Mine worked right out of the gate w/o any fuss. Wonderful device(s) and wonderful solution for those who'd like to add Z-Wave to their smart home automation solution of choice. Hopefully this review helped others looking for a similar solution as it took some Google-fu to find that the exact solution I was looking for was available.

Works Great! Maybe even better than the USB model! I bought this to work with the TubesZB POE so that my ProxMox cluster running Home Assistant in High Availability mode could switch between computers flawlessly if necessary as it won’t be tied directly to a USB and instead works over Ethernet, the cooordinator switch was easy with Z Wave UI addon by backing up the NVM file and Store file and restarting with the new Coordiator and restoring with old filesSo far so good! Couldn’t be happier with Zooz quality!

Everything worked perfectly. To be clear, it’s not a simple solution when using it with home assistant yellow. It takes root access and config file changes. But if you’re comfortable making those changes, it is a beautiful fit and does a great job.By the way. Many say that you have to disable Bluetooth to use it. When using it with the yellow and pi 5, that is not the case. I have zwave, zigbee, and Bluetooth all active and encased within the yellow’s case.

Fantastic when paired with the Tubeszb POE controller. Highly recommend over USB solutions due to USB juggling. Plug and play. Updates using homeassistant built in mechanism. zero issues with inclusion or range.

After Samsung broke the SmartThings integration for Home Assistant last month I started looking for a new hub for my Z-Wave devices and came across this little module. I agree that this product is not for beginners, but it sure ranks as one of the best values in home automation right now. Although the ZAC93 is designed for Home Assistant Yellow or a Raspberry Pi, all you really need to connect it to Home Assistant is an inexpensive USB TTL adapter. I just wired up the 3.3V, GND, RX and TX pins on the GPIO module to the corresponding pins on my CP2102 TTL USB adapter, plugged it in to my Home Assistant VM, and configured the Z-Wave JS add-on. From there, it was quick and easy to add my devices and now I have an up-to-date, high performance Z-wave setup!

Took me a slight bit of time to figure out the right port to configure this device as in my Home Assistant Yellow with the CM5 module, but once set correctly, the Z-Wave UI JS integration worked very well. I only have a Zooz Zen17 connected at the moment, but great to be able to have nearly all possible protocols all built within my Home Assistant Yellow (wifi/ethernet, bluetooth, zigbee, and now Z-Wave Long Range).

It plugged with into my HA Yellow and works with no problems. It was as easier than I thought it would be to get up and running. It was clearly built with HA Yellow in mind. It easily finds all the z-wave devices in my house. The only part they could improve is that the card is supported by the gpio pins, and to do that they cover up some pins that the device doesn't use. It would be nice to be able to easily access those pins for future use (adding a fan for example)

Perfect for my Home Assistant Yellow. Locating a required firmware update is a bit of work to locate; update was success. Great support from a HA Addon and Integration software. I am pleased to have the GPIO version instead of a dongle (personal preference). I will buy other Zooz products due to high quality if this product.