💦 Dive into tranquility with the ultimate water pump!
The UEETEKDC 12V Brushless Submersible Water Pump delivers an impressive 800L/H flow rate while operating quietly and efficiently. Designed for various applications including fountains, pools, and aquariums, this compact and waterproof pump is perfect for enhancing your water features without the hassle of batteries. Experience reliable performance with a brushless DC motor that ensures longevity and low power consumption.
Product Dimensions | 8 x 6.5 x 4 cm; 218 g |
Manufacturer reference | 5451 |
Colour | Black |
Number of Items | 1 |
Quantity | 1 |
Batteries required | No |
Batteries Included | No |
Voltage | 12 Volts (DC) |
Item Weight | 218 g |
G**U
Easy to use little pump
Dislike - short cable connection, 0,5 m. Better be longer for a pump that can work submerged in water. Need to extend wire connection with waterproof. Not cheap.Like - Powerful and in specs. Quiet an run smoothly.Just one day to try so I have no andurance feedback.I bought this little one to feed a camping shower and is doing a great job.
D**C
Great value for money
Great little pumps and can shift a lot of water! Not had any issues with the 2 I've bought. Not given 5 stars as the lead is way too short.
P**R
Quiet and good qualit, but limited use.
Pump is ok, delivery was very fast 2 working days from UK to Hungary more than I ever expected.I installed it circulating a solar panel for my small pool. lift the water 3 meters to the roof, lifting is ok, but no power to circulate the solar panel, I have to switch to high pressure membrane pump. But this pump works well, very quiet, but limited use, if you need more pressure it is not the perfect choice.
S**N
Better then i expected.
Surprisingly small, but does the job very well.i did read other reviews and the were a mixed bag but bought anyway. i’m using as part of solar heat pump for an above ground pool. total height 1m and approximately 40m of 16mm hose and the flow is good. nothing to complain about. i don’t know how long it will last but appears to be well made, only tome will tell.
S**T
Did not work - wouldn’t even spin !!
I bought this to empty my pool before putting it away for the winter. What a waste of money !Unfortunately I died not test out when I first got it and more don’t know how to contact the seller !!
R**5
Perfect for driving a soaker hose
I had a requirement to semi-automate delivery of a plant nutrient solution to plants in a set of planters. The idea was to lay lengths of soaker hose along the planters, which would then (in theory) deliver nutrient solution direct to the roots of the plants. I found that gravity feeding from a 100 liter butt provided insufficient pressure. So I needed to add a small pump, driven by a 12 volt source (since the planters will be located a long way from a mains power supply). The pump in this review worked perfectly. One of the key features is that both inlet and outlet have standard thread sizes, which take standard Hozelock adapters. I found that a single pump was able to drive 4 x 2.4m lengths of soaker hose, delivering a total of 15 litres per hour from the reservoir. So good, in fact, that I ordered a second pump, so I can deliver plant nutrient solution to another set of planters. I am now hoping that the resilience and low power requirements listed by other reviewers are as reported!
R**B
Good wee pump
Bought this as a pond pump. My set-up was quick and basic, just to get it up and running, so I intend to refine this as time goes on. I used hozelock fittings and an old length of garden hose for inlet and outlet, powered it from an old car battery and attached a DIY filter (old plastic bottle, gravel and sheep's wool insulation). I later added a solar panel and charge controller.With no pipes attached, the pump gives a very good flow and pressure, but I discovered that this drops quite a bit when you add any hoses to inlet or outlet. I was getting only a trickle out until I shortened the inlet pipe. So keep the inlet as short as possible.I had intended siting the pump on dry ground beside the pond, in a box along with battery and solar charge controller. For this to work, you need to prime the pump first. While this is not difficult, it does mean that if you have the pump on a timer, it will drain down and won't automatically start up again, leaving the pump running dry, which wouldn't be good for it. So I changed my plan and submerged the pump in the pond (which also allowed me to shorten the inlet hose).But it is at this point that you find the big drawback to this pump - the cables are way too short to be useful. At 300mm, you need to connect to a longer cable to reach the power source if the pump is submerged. At present I have added a temporary connection, but I am in two minds about whether to make a proper waterproof connection onto the existing leads or to open up the pump housing and solder in a longer cable - I'm not sure how easy it would be to get a proper waterproof seal on the pump housing after it has been opened.So, all in all, this would have been a five star review, but dropped to four because of the shortness of the cable.
S**E
Great little pump
Despite it’s small size this is a great little pump. I’m using it in a solar heating system for a hot tub. It’s been operating perfectly for weeks. Definitely recommend this to anyone.
Trustpilot
1 week ago
1 month ago