Lifetime 482731 Evaporator Fan Motor Kit by Seentech - Compatible with Whirlpool Kenmore Refrigerators, Freezers – Replaces: 4389140 8537621 4318001 0056721 0056801 1100473 PS376645 AP3110929 R0950025

We bought 2 others, one was damaged the other not like the photo at all but Amazon was great about returns. This kit worked great although we had to modify the fan a bit. There is one connector on each side (not both sides like in photo) of the motor but we pulled the tape and moved one over to the right. Works great and quiet!

I compared my fan motor to the one in the pic. They matched so I ordered it. The one I got did not have the electric terminals down one side like the pic, but 2 on one side and 1 on the other. This made one wire in my existing harness too short to reach the terminal. I used one male and one female spade connector and about 5 inches of wire to make a jumper and now it works. Boxed was crushed on arrival, motor mount arms bent. Straightened it all out and made it work.

The media could not be loaded. This 100% will work as a replacement for an older Whirlpool fridge’s evaporator fan. But, be sure to keep your old fan’s hardware so you can reuse them. The brackets that come with this were too short for my fridge. But I was able to retrofit the old bracket and make it work. My old fan had both terminals on one side. So the white wire would not reach this fan since the negative terminal is on the opposite end. But you can easily cut the wire and extend it with a couple wing nuts. I used an old iPhone charging cable wire and it worked as an extension. An electrical wire cutter would come in very handy. Also, the red blade is too large. So use your old blade as a template and trim the new blade to the proper radius. Scissors will do the trick. So yes, took some work but well worth the investment.

One user wrote "The photo clearly shows both negative & positive posts mounted on the same side. What I received had the posts opposite each other, so the wiring in my freezer could not reach one of the posts. Unlike one buyer who was able to make his own jumper wire to accommodate this".Same on mine .. I had to make jump wire to make this work...Quality... Probably made in china....My Refrigerator worked fine for 30 years without major problem.Hope this one works for next 10 years.... LOL...

could not ask for anything better....perfect fit, ease of installation, perfect noise level, functions as described

I was going to be heartbroken if I had to let my old fridge go and it lives on because of this part! I didn't install the motor but the fan was an easy replacement and for the price I have a backup motor. Thumbs up!

It wasn't quite the same. I had to modify the pig tail on my refrigerator to make it work. Wires just bearly reached because the connections were on the opposite side. But it is working good.

Great quality