Waxpol X-Cut Rubbing Compound 100 g (Set of 12)

Got the product a few days later and attempted buffing the car with it without delay. The compound is as expected. It is not designed to help you with paint restoration, paint repair, and all those heavy damage your car's body has taken. This product is exclusively designed to work on top coat or what you otherwise call clear coat. Whatever light scratches you see under intense light, and swirls, and paint from another vehicle on your vehicle's body after a minor rub is all removed by compound. So if you're somebody with high expectations, or that budget guy who expects wet finish after tearing half the bumper off in a road accident, don't bother buying this product and then leaving a bad comment here. More people should understand what a compound is and how it works. So in my case, I had plenty of swirl marks on car that is 6 years old. The paint and gloss is already in good shape. After applying the compound, I have it a good buff with soft cotton cloth. Old banyan in my case. I didn't muscle the compound. Just rubbed it continuously for a 30 seconds. The secret is working on small patches at a time. Don't smear the compound on a large area and let it dry. Work on small squares each time and you'll get it right. You'll quickly run out of compound with the method I used. But then you should know auto detailing isn't a cheap work. This is why paint restoration, rejuvenation, and all detailing work cost a bomb. It's all about the right technique. Use it in a wrong way and you'll get the worst result even with the best product. Remember these pointers when you're using this compound1. Work on small squares2. Strictly avoid rough fabric for buffing use softest if possible3. Don't expect compound to miraculously fix the paint-level damage. It won't

PROS:1.This product actually works. It has a slight grainy feel, has fine abrasives. Apply a drop on the scratch and rub it in circular motions with light to medium pressure with a microfiber cloth and the scratch disappears.2.It does not leave any haze that you have to cover up with wax.3. It removes oxidation too4. Leaves a polished finish5. Works on metal and plastic bumper parts6. Can be used on Bikes, Scooters also.CONS:1. It won't work on scratches that are deep or can be felt by the nails.You may still try this. I was skeptical about buying this product but it turned out to be a good buy for ₹120 (MRP-₹200)It works like a magic liquid, Must Try!

Not very effective product to remove a slight deep scratch marks. Also effective on fiber surfaces mostly and not on metal surfaces.

I thought it will work like charm for a small but deep scratch on my new car but had zero effect. I think it is made for light scratches only, and not for deep one where paint has removedEdit : it's not working not light scratches too. It's totally useless

This is a detailed review.In short it works perfectly for it's purpose. I purchased this product for Rs. 99This smells like kerosene. It can be used for removing general scratch and scrub marks but not marks caused due to dent or bending of metal.To remove scratches, clean the scratched area with soap water and then with clean water. Dry the area and apply a thin coat of Waxpol X- Cut Rubbing Compound over the scratched area and then wait for 5-10 mins to let it dry.Take a cotton cloth and only a cotton cloth, not any synthetic or woollen cloth, and cloth only, no tissues, paper towel or anything like that. Dab a small quantity of rubbing compound over the cloth and start rubbing the scratched area over which you applied a coat of the same. You have to rub it by applying medium pressure and moving the cloth in circular motion.Rub until a shiny surface is visible where there was that scratched surface earlier. Stop when you reach the desired result. Let it dry under sun and try not to touch the treated area.The only downside is you have to rub for longer duration of there are long and multiple scratches.That's all. You saved a couple of bucks from professional scratch removers.

It's good n effective, but not recommended to use multiple times it fades out the color.It's affordable and instant effect giver.

The product works well as long as u r using it as a shiner. Don't expect it to cover cuts and scratches. To some extent it can improve surfaces from swirls.I suggest using this with a cloth and a hands.I tried with a Bosch machine and with a medium pressure you can see the paint on the woolen. So please do not use this with machine.Mild pressure and only for a shine.

It's seriously for the smudge scratches & paint transfer kind of jobs.It does restore a bit of shine of the paint but apart from that it's not so effective on light scratches as well.I used it with a microfiber cloth and swirling properly around the affected areas.For light scratches or medium I'll recommend the classic wet sanding and polish in a detailed work.Do note that after treating the area, always wax it off.