T&K TO-KING 4 Pcs 600mm Connectible Mains with Independent Switch T5 LED Under Cabinet Hard Strip Lighting Bars Hardwired LED Cupboard Light Fixtures 4000K

Did the job very well ,very bright and a good price

They are very lightweight but dead easy to fit and daisy chain together.For clarity the connections are about 18cm long but the end with the plug is about 40cm long. If you need to hardwire just cut the plug off as the connections to hardwire are only about 15cm long.Overall decent lighting for the price and plenty bright enough.Nor sure about longevity as only just put them up

Excellent, so easy to install and a nice light for under kitchen cabinets

When these lights arrived (30 and 60 mm packs) I was concerned to find the connectors were 3 pin including an earth. Also supplied is a 3 core cable, and connection of the earth or "ground line" is detailed in the instructions.This was a problem because the supply cable to the existing lights under my cabinets is only live and neutral via 2 pin connectors and is not earthed.Most lighting of this type does not require an earth, so I opened up one light to see how it was wired internally. I found that at the internal side of the 3 pin connector, the earth pin was not connected to anything. It reminded full insulated from the housing within the plastic of the connector and serves absolutely no purpose.The lights are now installed with no earth and no issues. I have no idea why a 3 core cable and connector is supplied with them.They are very bright lights, light units so only 2 small clips needed per unit. 4000k is a good daylight temperature for the kitchen.

Easy to install the lights and good lightweight design. Only problem was that one of the four lights was missing a bracket so I have had to make do with three which is disappointing

Each lamp comes with its own lead to wire directly to the mains. Only criticism is that these leads could have been a bit longer. Other than that great value for money.

I used these lights to replace two old fluorescent lights that had been in place under kitchen cabinets for upwards of 25 years, and I have to say that they were very easy to fit indeed.I was able to hardwire them to the existing supply which fed the old fluorescent lights, however if you intend to plug them in to a socket then be aware that the pack of four lights comes with only one power lead, and if your cabinets have a break or gap as mine do - i.e. my hob/oven & hood is in the middle of my cabinets, then you will have to find a way to connect between them over the gap. They do come with small joining leads to go between lights, but they are only about 150mm long. Perhaps an additional power lead in the pack would be useful in these circumstances.The lights themselves are very ‘light’, dare I say, possibly not the most sturdy, and the mounting brackets are easily bent out of shape, as I found out, but just as easily bent back into shape again too, and with a little bit of care, once fitted then they will never be moved, and are more than adequate for the job. They do work very well, lighting up the worktops nicely, and I’m happy with the end result.

These are light weight and simple to install, with options to use the 4 lights individually or connected in a row with just one power point. Very versatile.