Amer AMR6S32 Hex 32" Monitor Mount Stand

I tried 3 other stand and this one is by far the best. I have 6 27" monitors. You could easily go 28". I think 32 would be a stretch though. Maybe if they were flat but who wants that. I had to do a lot of custom work to get it the way I wanted it though, it didn't come out of the box like I thought it would.First I had to grind off the pins on all six bars. The pins limit the amount of angle the side monitors can go. Roughly 15 degrees and I wanted mine at 40.Second I had to turn the Vesa mount 90 degrees because the large mount was blocking my cables. Luckily it is design to do this but you have to take apart the entire mount to turn it. Just make sure you don't lose the plastic cuplings as they just fall right out. Make sure the nut side is facing down or you won't have the proper tilt adjustments.Third the side bars were drooping just a little bit. So I went to the hardware store and bought bolts to replace the wing bolts that came with it. That way I could crank down on it with a socket wrench and that fixed it.Lastly when I put on all six monitors the stand fell over. Probably why they limit the angle of the side monitors. I turned the base stands to 90 degrees instead of 45 like in the picture and this fixed that. Im suprised they didn't engineer it like that as it is much more solid.Getting the monitors to but together nicely was a battle in itself as there are no fine tuning adjustments. You just have to bump it and tighten it until you get it right. It took a while to do this. Do yourself a favor and use a level for the center monitor bars so your side bars are even.Now that it's all said and done this stand is perfect. My monitors look exactly how I wanted them. The stand is sturdy and the monitors are even and nicely put. Still the best stand out there. It just took a lot of work to get them there.

This stand is poorly designed and fabricated of flimsy, low-quality materials. Six 32" monitors can barely be squeezed onto the stand, making viewing angle adjustments impractical. This stand could not hold 6 x 32" HP OMEN monitors and the four monitors located at the corners regularly tilted outwards. When I attempted to return this stand for its failure to perform as advertised, the seller. AMER NETWORKS, refused to offer more than a 50% refund. Do not waste your money. Far superior hex monitor stands are available by Loctek and other reputable manufacturers.