LEMORELE M.2 NVMe SSD Enclosure, 10Gbp Aluminum Hard Drive Enclosure with USB 3.1Gen 2 M2 USB C External PCIe B+M/M-Key SSD Caddy UASP Thunderbolt 3 Case Compatible with Intel 760P, Kingston A1000

Neat little device. I have a couple that I use to house M2 SSDs that I replaced with larger ones in a NAS. Works perfectly and set-up is extremely easy. Just angle the M2 to slide into the connector, press down to make it parallel with the casing, insert the little rubber restrainer and you are done. A word of advice, don't pull the inner tray completely out of the metal casing. Just pull it to the end and stop. The casing is very snug and it is difficult to get the tray back in if you have pulled it all the way out, especially with a M2 fitted as the tray bends (but the casing does not) and it would be easy to damage the SSD if you push too hard trying to re-insert the tray into the casing. But that is not the manufacturer's fault. You are glad that the casing fits so tightly once the M2 is inside and it makes the whole device feel very solid when assembled. Data transfer is at lightening speed friom USB3.1 as you would expect for a SSD and no issues so far. Very good value for the price and recommended.

Very fast and it was so easy to fit and configure, first had to partition it then format, but easy and all went well

Very easy to insert the ssd drive so it's up and running within a few minutes.Would have given it five stars if they had included another option to hold the drive down instead of a fiddly 'plug'. They included a nut but no screw 🤷‍♂️Anyway it holds the drive, looks good and is quick to swap out drives. Great product.

Product is of good quality

I got the so i could copy my nvme 256gb ssd with it's os, so i could change my nvme ssd m2, it works with WD (Western Digital), WD Blue SN550 NVMe ssd 1TB,. Comes with 2 ledss usb c to usb c and usb b to usb c, and the device with some guide, it is small and lightweight was easy to put in nvme in just the screw is abit fiddly has a lip on fixing screw were nvme fits as it shouldn't be screw doen bord on bord could course damage to nvme, once in works great and dus both typs b+m & m. Will be getting a few more Will 9me in handy for storing VM's on a nvme. Overall it's an amazing little device...

Thanks great buy and service

This is simple to install your drive into once you lift it and put it in at an angle.Dont just try and push it in even if it looks like it will go as the lift and push action seats it properly on the pins.The small plastic securing screw thing is a bit crude but it will hold it in once you get it positioned right.There isnt any room for a heat sink and I didnt bother with the stickers as they only make it hotter and tighter.The whole drive and its support then slides into the external case and clicks to lock it shut.You get a usb cable to run it and access it from.This is being used on my wii consol as an external hard drive and works perfectly.This enclosure isnt for SATA.

Worked as expected however the lock button doesn't work so the internal part doesn't click into the the casing so if you pull it out of a usb port the outer case comes of leaving the rest still in the port.