Full description not available
A**B
Best bang for the buck.
I saw there are minimal reviews for this item, so I figured I'd toss in my input.Overall this exhaust is very good quality. All the welds look to be done well and the quality of the piping is good. Exhaust lined up easily enough. After buying this exhaust, I can not justify spending upwards of $500 for other exhaust systems for the Z125 (such as the Yoshi, Zoom, etc.) Although, I don't doubt their quality--I have no major complaints with this exhaust.It is a very deep tone down low (for a 125cc) and sounds nice throughout the rev range.My two minor complaints--There are no instructions. The mounting brackets took a little bit of messing with to finally get them where I was satisfied with them.The "carbon fiber" muffler section seems to scratch fairly easily. I scratched it a couple times on the install. Nothing major, and I guess is to be expected with a $100 exhaust. In the end--great quality for the price and would recommend.
W**.
Great sound from an inexpensive package
Your browser does not support HTML5 video. Lack of instructions isn’t much of a deal breaker here. The placement is pretty straightforward, however, the bracket that mounts just below the right peg did not reach at all because it was bent, probably in shipping. Bent it a little more to get it out of the way or it would be rubbing against the frame. The bracket that hides behind the cover to support the muffler didn’t fit right either. Had to make some modifications to get it to fit properly. Overall, it sounds great. Have the comparison video. Not sure if I like the look of it.
L**T
Get this exhaust; solid deep rumble. Slight fade in real high RPM but worth the $$ 100%
Defiantly the best exhaust you can get without spending hundreds of dollars. Would buy again.I gave this 4/5 for a couple reasonsFirst off it’s a great exhaust. Mine came in the mail fast. Ordered Friday morning 9am, here on Sunday by 1pm. It took an hr and a half to get it on. THIS IS A CHEAP EXHAUST. Your expectations cannot be at a Yoshi level. Yes, this is a knock off yoshi, it comes with no instructions. You just gotta get it on loose, and build it as you go and figure out how you can mount it really. So far I haven’t heard anyone say it for perfect. Everyone I’ve talked to or read a review said it took some improvising to get it on, same for me. But I got it on and I’m really happy with it. I used the bracket (it sucked to get on but I got it on) and used that to keep the exhaust away from the bike, it works like a charm. The other bracket that’s welded to the bike I just jammed into my foot peg to prevent moving. The stock exhaust was held with one bolt and 2 at the manifold. I just did 2 at the manifold and mounted to the bracket the kit came with. I later took out the baffle from the small Allen screw under the tip of the exhaust, that let the head come out, the baffle was held on with a Phillips head screw. Mine was hard to get off so I used my drill it came right out and the baffle delete makes it sound real aggressive. My 2018 z125 Gained an unknown amount of horse power with this pipe. I can ride up to 62 no problem now. Before it held strong at 56-58.I recommend this over the expensive yoshi 100%. Is but it again later too. Or just get a slip on name brand muffler and keep the piping body. Clean welds, and went on easy. Save your money and just get this. Watch what your doing while installing and you won’t scratch anything.
8**.
Project Z force
Your browser does not support HTML5 video. There are No modifications To the bike needed! It fits very tight with close tolerances for the best alignment attach the head pipe loosely and then put the mounting tab on the intermediate pipe In between the top bolt on the foot peg and the frame don’t forget to install a spacer at the bottom bolt between the peg mount and the frame then the can mount install is pretty straight forward the 12 mm hex spacer bolt goes through the center hole in the mount then the angled tab goes behind the top pipe of the rear peg mount and and the clamps go on the bottom pipe.
A**S
Amazing Quality, Sound & Value!!!
I seriously cannot believe the quality and value of this exhaust system! I nearly spent 3x’s the money on a Yoshimura system that is nearly identical in looks and sound!While this system did not come with instructions, it is fairly straightforward and simple to do in about 20-30 minutes. If you search for some install videos of the Yoshimura system, it’s pretty close to the exact same process!The system has a removable baffle, but it is PLENTY loud with it still in the can!If you own a Z125, BUY THIS EXHAUST! Your bike and wallet will certainly be glad you did! The $350 I saved by going with this system over the “name brands” allowed me to purchase a Chimera intake and Bazzaz fuel controller!
S**S
Great pipe for the money!!!
This is an AWESOME exhaust for the price!!!Yes, its a Yosh knockoff loop pipe with an Akra clone muffler. But the finish is great and the welds are awesome and it sounds GOOD!My only gripes are the mounting tab for the mid pipe. Its supposed to go between the peg bracket and frame. Also out of the 2 springs that hold the muffler to the mid pipe, only 1 fits correctly. the other is loose. But at this price point, I'm willing to deal with those slight inconveniences!The exhaust sounds GOOD!!! Both with and without the Db killer. Just slightly louder than stock with the Db killer in. Nice and deep with it out. Not too loud at all.
R**
Nice sound but no instructions
Once you figure out how to put it on it sounds nice compare to stock pipe. There’s no instructions and there’s a lot of parts I have no idea what they’re for. I sat and stare at parts for like 10 minutes lol. I didn’t use any bolts or screws that came with it... I rode it around and seems to be fine... couldn’t use the strap... it wasn’t fitting anywhere...
J**H
Decent but you get what you pay for
This is going to take some work if you want it to mount correctly. I had to bend the pipe to make it reach the foot peg mount.One huge complaint is the way the silencer fits on the header. It is extremely loose fitting and only has one exhaust spring mount on the header so it has a massive unavoidable exhaust leak and gets very loud and raspy once it warms up and starts leaking more. If it weren't for that design glad it would get 5 stars from me.
Trustpilot
3 days ago
1 month ago