Baytek Cell Phone Light-Weight Protective Holster/Case with Kick Stand, Secure Grip and Belt Clip for Apple iPhone 6

I like this case, it has most all of the key features I want and need. Each of functions is done fairly well. I dropped 1 star because the phone case is a little slick and I've dropped it several times as an outcome. Otherwise, great case.Pros:Belt holder case: cased phone easily slides in and out of holder, the holder has felt to clean the screen which works reasonably well, holder does hold phone on 3 sidesBelt holder clip: can accomdate up to 1.5" belt, it seems fairly sturdy, it can swivel but stays in the position you put it in; it props open but not sure whyPhone case: easily access on/off, sound off and volume controls; camera and flash are no issue and case is thick enough to prevent all damage to camera lens; can easily access sound and lightning port on bottom; case appears to be adequate with regard to protecting phone when dropped on edgeCons:Belt holder case: you cannot connect charger when phone is in holder; you can put phone in upside down which can make it hard to get outBelt holder clip: Can't handle larger/thicker belt, like a western beltPhone case: the case is actually fairly slick for me (I have dry skin issues, so might not be for others).

No complaints - quick delivery, affordable, comfortable, and functional. I previously had an Otterbox for this which I didnt care for. I ordered this Baytek for $9 and a Versus wallet for $21 expecting to not like this or break it quickly. I have gone through many iPhone4 holster cases from other vendors (including Otterbox) previously - this is more comfortable and so far much more sturdy. I do have a choice and this has been my choice of iPhone6 cases so that says a lot. Without the belt clip I put my phone in my shirt pocket and risk dropping it every time I bend over - which could be a problem in the restroom ;-) The kickstand works fine and is good for watching and taking videos and using the speakerphone. The only mild annoyance is that it slightly interferes with the lightning charging jack. I slide it out1/4" and all is fine. It if does give me grief I will just notch it 1/16" with a dremel tool. I have no issues sliding in/out one-handed, especially while wearing.Try it, if you dont like it it was only $9 of your time -- cheaper than what you have invested reading this feedback!

I originally had this for my iPhone 5, when I upgraded to the iPhone 6+ I bought the Baytek case for it because I liked the previous one so much. It protects from drops pretty well. Though those drops have been on various types of carpeting or kitchen floor, no concrete yet. I suspect it would hold up ok. The bracket on the back is great. Makes it easy to watch videos, etc. However, the rounded support that holds the bar support which in turn holds the bracket in place on the back, did break after about 3 month's worth of use. However, I think it did so because I forced the bracket open for the first time from the back plate...basically, my fault. I then ordered a new one directly from Baytek...the only other thing with this newer one was the bracket did come of it's track and I had to force it back it...has been fine since. I've had this new one now for nearly 3 months, it has worked fine except as noted above. That notwithstanding, I would recommend this product.

This is a difficult review, there are good and bad aspects to this case. On one hand this phone holster fits the iPhone 6 perfectly. The main case is very skinny which is good because unlike other cases I tried it does not add excessive bulk to this slim phone. On the minus side it does not seem to offer much protection from drops. The textured surface looks great and offers enough friction that the phone does not slips from the hand. Its elegant design seems very appropriate for formal/office use. The real problem is that the clasp that attaches to the belt broke in less than a month, when the holster grabbed on the armrest of a theater chair. The plastic support is very flimsy. I cannot blame the manufacturer because i should have been more careful. Just be aware that this is a delicate product.

I like this cover very much compared to the original cover I purchased at the cell phone store, this Baytek cover is very slim and has 2 kick stands, one on the cover and the other on the belt clip. I have 2 issues, the belt clip stand comes off and I have to use both hands to remove the phone from belt clip witch I find annoying because it's on tight and when I need to answer my phone quick. A major plus is that it's easy to access volume button and power button. I recommend this cover.

***Update***I had to downgrade the review from three to one star. After only three months, with regular use (no dropping), the top of the phone portion broke and the phone has problems fitting into the case. The problem boils down to poor quality plastic. This case should be avoided.*** Update End***The case is functional, but there are some quality issues. The fabric that is on the inside of the belt clip has a wrinkle that is high enough to touch the screen of the iPhone. This is a nit since all that it does is clean that portion of the screen (but it does make this case scream "cheap product"). More annoying is the fact that the edge of cover is straight and will slightly block the headphone jack and Lightning cable ports. The iPhone case has notches so the ports are exposed, so it is just a problem with the case The two pieces are loose enough that you can have them plugged in, but it is probably best to have them plugged in before attaching the cover. I will need to take a Dremel tool to make my own openings.

Very good product. I would give it 5 stars if the holder had more space for the charging port. If you use the old apple charger with an adapter for the 5 series and above, that fraction of a millimeter overlap does not allow for 100% connection and creates charging issues. Otherwise, this is a great product. I bought another holster that is more open near the charging port and it is not as good quality as this.