JolyWell RGB Floor Lamp, 63" LED Corner Floor Lamp Compatible with Alexa, Smart Standing Lamp with Music Sync and DIY Colors, Modern Corner Light for Bedroom, Living Room and Gaming Room, One Pack

In the attached photos, I have placed a 4 space Odyssey case on the left for comparison. And this particular 6 space case on the right (hereafter: road case). The road case is well-constructed and does have 3/8 inch plywood with a nice black laminate finish. The handles and latches are the good quality Penn/Elcom but I don't know about the corner pieces. Compared to the Odyssey, this road case doesn't look as "polished" or "finished." Notice in the photos where the Odyssey uses nice, smooth carriage bolts to bolt in the rack rail, this road case uses a clunky looking hex bolt and washer. Odyssey has large rubber feet on the bottom of their racks, this road case has none. Odyssey has a much cleaner looking black paint finish on the inside of their racks, this road case has what looks like a thin coat of black stain. The hardware on Odyssey is also shinier and more refined looking than this road case. With all this said, I am still happy with this road case. At nearly half the cost of an Odyssey, I will change the rack rail bolts to carriage head; add some rubber feet to the bottom and paint the inside with a nice acrylic latex satin black. For that investment of around $10 in time and material I will then have a case that looks pretty darn close to an Odyssey for a really good price. Now, you're probably wondering, if I had read a review like this would I have still bought this road case? Answer: Yes. Aesthetics aside, it appears to be very well built and durable. I'm sure I'll be happy with it. I hope this vendor continues to offer more options for this rack in the future. With the minor revisions I listed, I think they'll have a really nice product!

I'm using this with a ThiEye i60e. The camera fits in nicely with one exception. The back of the housing will not slide in place.I'm not faulting the housing on that since it wasn't advertised as being compatible with the i60e. I may take a dremel and try and make a few alterations to make it fit. Otherwise, I'm going to use a heavy duty rubber band to keep the camera in place.I was surprised to find that the aluminum is not super thin. It it appears to be well made and quite sturdy.It has both the GoPro mount and the standard 1/4-20 tripod screw.Camera buttons are easily accessible and you can remove the SD card without removing the camera from the frame.Overall I would buy it again, even knowing it doesn't quite fit the i60e.

This case is awesome, easy to assemble. Going to order another one. The tightening screw is on the bottom, so be sure not to over tighten. I was worried that the tightening screw would interfere with the attach point of the handle. But it works perfect. This thing is sleek and very cool looking. The cold shoe is part of the camera, so you don't have to screw it in. Very pleased with purchase.

I purchased this to house my XAir-18 Behringer mixer (3U), furman (1U) and accessory drawer (1U), so I added another power conditioner to take up the last 1U, but not pictured. This is built to last and is actually pretty heavy just by itself without anything in it, so when you add your devices, it can get heavy if you have to carry it a long way from your car to a stage. Recommend a hand truck if you are solo. It comes with all the hardware and lines up perfectly. Great way to protect my investments and makes set up so much faster, cleaner and efficient! Recommended

This case is only slightly lower in quality than an identical OSP case I have, but at a much lower price. The hardware is not top of the line Penn-Elcom, but still seems sturdy. The hardware is a lighter weight material and not as polished as other flight cases I have seen, but the cost savings is very significant. It came with proper screws to secure your gear as well, so you do not need to purchase that separately. Shipping was also much faster than indicated, I got it in about 5 days.

I run my over driven sounds using the distortions that generates a Marshall JMD 100, However, one of the weak spots of the JMD is the heavy metal sounds. I use the clean channel of the amp and then, by experimenting with different settings and drives, I placed an electro-harmonics Glove drive pedal that runs engaged before the Metal Shaman. It is heavy metal heaven when pushed a bit by another pedal like this, it pushes it in the right spot I would say. By itself, the Metal Shaman does good, but the tone from it depends very much on the character of your clean amp. The character of the tone in a clean channel determines very much the way any pedal behaves when run through the clean channel in use. The clean channels on the JMD are not very good, but the Glove drive makes them a lot better when used as a boost, and by boosting the clean channel, and having the Glove drive just before the Metal Shaman... does makes a lot of difference. So a very well designed pedal like the Metal Shaman may not sound as good as it should because it is being run through a weak chain signal and the valves in the amp are not being properly pushed/opened/widened/

Having long been a devotee to Shea Oil, I was excited to find this Moisturizing Milk with organic Shea Oil as one of its main ingredients. I have been very pleased with the moisturizing, soothing, softening and firming benefits of Shea Oil, so to find this moisturizing milk which also has an exquisite, yet subtle, lavender scent...I was thrilled! I also use this product at night for spot treatment of my sun/age spots. This is an absolutely wonderful product, which I will definitely order again.

I bought this for my Campark ACT73R and it's fits like a glove. Haven't had any trouble with the back cover not fitting properly or so snugly that it scratches my camera. It's very lightweight and well built and the lens cover/UV filter fit great. I haven't had a chance to make use of the cold shoe in any way, but I like that it's there in case I do decide to experiment. I especially like how the housing leaves the connection ports and SD card slot uncovered so they can be accessed anytime without having to remove the housing completely.