2Pcs AC 16A 250V/125V 2 Position ON/Off Waterproof Boat Rocker Switch with Red Indicator Light

Nice switchWorks as it should,

It’s a very nice switch only reason I gave four stars is you have to use both poles on the switch in order for the indicator light to work.

Nice dpst switches, feel sturdy and look good

The pins are numbered 1-6.Pins 1 and 2 connect when the switch is thrown.Pins 4 and 5 connect when the switch is thrown.If you connect positive and negative voltage to pins 2 & 5, it will stay lit all of the time.If you connect positive and negative voltage to pins 1 and 5, it will light up only when turned on.So, if you want to use the light feature, you'll probably need to connect three wires to the switch: 120v positive and negative to either pins 2/5 or pins 1/5, and then another wire to either remaining pin.Don't consider this a detailed explanation, just some starting info. I'll post a wiring diagram when I get it wired correctly. I'm a novice with this stuff, but I thought the info might be helpful to someone else.

Exact fit for on/off switch for Pavoni Pub Espresso machine.

Solution, wire both sides of the switch. Terminal 1 & 2 hot; terminals 3 & 4 neutralI purchased multiple of these switches and I can't get any of them to light up. I am switching a fan on/off using the hot leg of the wire across terminals 1 & 2. I have also tried terminals 4 & 5. The fan works perfectly, but no light no matter how it is wired. This is a 120vac circuit.

I bought this to replace a perfectly good switch in a brand new power strip that I bought for my new electronics bench. The old switch didn't have a light inside it that turned on with the power and I wanted it to light up so my wife could punch the switch without knowing which one to punch if something were to go wrong and I was not able to do that for myself. I considered an actual emergency cutoff switch (in fact I have one or two of them already) but that would have required my building a separate box for it. Having it built into a centrally located power strip made more sense. This switch served that purpose nicely, though I did have to do a little filing to get it to fit the enclosure I put it in.

Great switch at a great price. The order did come with two units, I only needed one for my project. There is a booty around the switch itself which gives it a feeling of water restriction, but I haven't tested this. I used my switch for turning the 120v mains supply off and on for a brew controller on a 20A circuit. I haven't noticed any unusual heating from the switch or any of the surrounding components, though I think I'm using this switch right inside its parameters.My switch is green and exudes a lovely green aura that draws my kids in and begs them to toggle it, so beware :)