Illuminate Your Drive! 🚗✨
Upgrade your Chevy Silverado with these 3-inch 24W LED fog light pods, designed for a perfect fit and easy installation. With a sleek powder-coated finish and an impressive 30,000-hour lifespan, these lights are built to withstand the elements while enhancing your vehicle's visibility and style.
Brand | XJMOTO |
Color | Mounting Brackets & LED Light Pod & Wiring Kit |
Specific Uses For Product | Fog Lights |
Light Source Type | LED |
Vehicle Service Type | 2007-2010 Chevrolet Silverado 2500, 2007-2010 Chevrolet Silverado 3500, 2007-2013 Chevrolet Silverado 1500 |
Special Feature | Waterproof |
Voltage | 30 Volts |
Wattage | 24 watts |
Auto Part Position | Front |
Lens Color | Clear |
Lens Material | Polycarbonate |
UPC | 712396501718 |
Manufacturer | XJMOTO |
Item Weight | 6.41 pounds |
Package Dimensions | 9.96 x 7.87 x 4.02 inches |
Item model number | 712396501718 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | 712396501718 |
Special Features | Waterproof |
J**Y
Great look, pain to install
I love this set of lights. However, there are some pros and cons. So, it depends on what you're looking for.Pros: bright light, soft white light, looks really cool.Cons: difficult to install, not a lot of movement to adjust.When installing these I ran into a problem with a bolt behind the bracket that wasn't able to go back in and allow the bracket to sit flat against the back. So I had to leave the bolt out. Not a major deal since it doesn't seem to affect anything. Also, trying to tighten the bolts for the bracket itself seemed to be almost impossible. So what I had to do is, with the bracket off the vehicle I put the bolts in and ran tape over them in order for them to stay in place. I would recommend using an epoxy or some type of glue to keep them in place and let them cure. It will make so much easier during install. The reason being it was easier to attach the lights to the bracket before you install them. Once I had them installed, I could adjust them down at all. They do seem to aim a little high for fog lights. But I haven't been brighted by anybody yet, so that's good. Other than the cons, I really love the way these look. I really do recommend these if you're looking for a different look and something for off-road use. Just pay attention to the installation.
M**T
Install and instructions
It was incredibly easy to install , it took maybe 40 minutes- an hour from start to finish and that included take the old lights out, mounting the lights, and lining them up. The brackets it comes with were surprisingly steady but the instructions were a little unclear about some one part in particular, the one used to “straighten” the mounts or something like that. I ended up not using them but I feel like it’s strong enough without them.
P**N
Pretty good, and decent price
Read entire review for specifications:I’m reviewing this because when I bought it there was no other reviews. For the price I would recommend, they got here in 2 days, not damaged and did include the items pictured. The actual brackets are decent thickness. I haven’t yet installed it to the bumper itself, so I can’t speak for that but I have installed the lights onto the bracket. The instructions are just a single sheet of paper that aren’t specific at all, and have one tiny photo you can’t tell what they’re even attempting to show. The bolts didn’t quite fit into the bracket without enlarging the holes a bit, by just threading them into the holes by hand, which wore down the thread a bit but not too bad. The bolts and nuts included with this kit are just so confusing. However, I was able to use the factory mounting bolts that came with my specific 3 inch pod lights that were a perfect fit for mounting the actual light pods onto the bracket. I also used them because they happened to be black and matched my pods so I figured they’d be less noticeable. I will likely update this review once I have finished installing completely.For anyone who is interested these are YCHOW ( I think ) brand of Led 3 inch light pods selected in the black option. They were like $33 or something like that.
M**G
Look great on the truck
Fits perfectly in the factory location I really love the ability to have wider coverage by aiming the outer light out toward the roadside really lights up the deer while driving. You will need a little patience as you need to remove and reinstall to aim them as the bolts are not accessible when in the bumper. I did glue the carriage bolts to the mount to make life easier. 10/10 would recommend
J**N
Bright
Installation took me a couple of hours but I’m happy with the lights. They look good and are bright. The beam is very wide so not sure they will be good for street driving
D**.
Bracket required trimming to fit. Not any better than high beams for off roading.
I hate fog lights and DB's who drive with them on all the time. Since I don't want to be that guy, I wanted to have something useful in that position on my truck, so I've wanted to put off road lights there, so that I could use the switch.To install I had to grid out part of the bend on the top to clearance a bolt that was in the light pocket. I don't know why my truck would be any different than any other, so I would consider this a design defect. But for the price I didn't mind.These really don't have the power to function as good off road lights. I know that the position isn't great for that, either, but I was hoping that it would throw light further down the trail. As it is, they are no better than my high beams. At some point I'll probably relocate 2 pods to the rear bumper and replace them with higher power spot lights, and aim the others wider. Oh yeah, adjusting the aim is nearly impossible once they're installed, too.You get what you pay for, so I'm not pissed off. These cost the price of the bracket alone in some places, so it is a decent buy if you, like me, never use your fog lights and just want something else there and don't mind maybe replacing some of the parts to work better in the future.
D**7
Works well good value.
They worked well and weren’t difficult to actually install. Prepping them however I found out the prefilled holes that use the supplies carriage bolts were not large enough and had to drill all 4 of them out. Other wise they worked well and included everything needed for a truck already equipped with fog lights.
T**S
Installed into a replacement bumper
Please note these were installed into a replacement bumper that had easy access to the mounting areas 2011 Chevrolet Duramax 2500 HD). On the passenger side I did have to remove a bit of metal from the supplied bracket, this was due to an issue with the bumper, NOT the supplied bracket from the light manufacturer. I have noticed radio interference from these on the AM stations on the radio. I may be at fault with the installation, I did not have a proper crimping tool for the connectors, I used a needle nose plier. I am ordering new connectors and a proper crimping tool and will redo the connections. The cubes are heavy, feel durable and are VERY bright, now I need to replace my old factory headlights! While I ordered these quite a while ago, I finally had time to install them on 10/24/20 (ordered and received in July 2020).
Trustpilot
2 weeks ago
1 month ago