Double Din Radio Stereo Dash Installation Mount Trim Kit Compatible with Toyota Vios belta Yaris Sedan

Fits okay, there is a gap at the top where it doesn't fit exactly but it's very easy to install and for only $30 I'd say it's worth it. Also the color is ever so slightly different.

Double din radio

Its a dream considering you cant find this in a store. I got it together easily and quickly.

Overall for the price and a cheaper car like this it'll do.Fitment was ok, had very slight issues with putting the a/c vents on the trim. It didn't fit right needed to trim just a bit with a dremel. It's super close but 1 or 2 tabs wouldn't have attached.Color is a little off but having different trims and variations meh it's a cheap daily not a high end car so don't care too much.DONT FORGET to swap over the red trim clips from your old ones.Also you don't need those plastic radio brackets if running double din. Reuse the factory brackets.Other than that love ordering through here speedy shipping and worse case easy returns

Width of fascia plate opening did not align for proper aftermarket headunit installation. Had to use Dremel to make exact fitment.

I used this for a 2 din apple carplay stereo. The brackets that come with it held up the stereo just fine, I didn't even have to use the original brackets. We will see how it holds up. The color is a slight bit off, but you can barely notice it. It's has a slight gold tint to it, but I dont mind. As long as it fit and held up good, im happy.

This was/is an interesting solution for those with a Yaris looking to upgrade to a double DIN receiver, such as one equipped with CarPlay for Android Auto. Instead of having the usual stock opening, this kit has a smaller opening more aligned with the dimensions of a double DIN unit, while the stock Toyota unit has additional width in this area, requiring some kind of trim kit to fill the space. This kit comes with a mounting port much more in line with the double DIN dimensions and a small trim plate that can be used to dial in to the dimensions of your receiver. For example, my receiver is a Pioneer AVH-2550NEX and I found that the trim plate was needed to create a visually appealing seal around the face of the receiver without any gaps.The problem? The color is slightly off. The stock radio trim has a very slight champagne colored tinge to an otherwise silver appearing color. This kit has a more pronounced champagne color. It looked okay on its own, but when compared next to the stock color, the difference was significant to the naked eye, with this unit appearing much more yellow in color. If you don't mind the color difference, this will likely serve you well. Being picky, I opted to simply go with the more expensive official part from Toyota.

I purchased an Android screen unit to replace my OEM radio and CD player on my 2008 Toyota Yaris sedan (4-door) since the unit I bought came with a fascia which only fit the 2008 Yaris Hatchback (2-door). This unit was reasonably priced and seemed to fit the Yaris sedan.The fit is actually good, but the plastic is so fragile that despite careful handling while installing it, two of the alignment tabs broke off. Fortunately, the tabs that use clips for insertion held up. In short, it's a great fit but reducing it to 3 stars because of the cheap quality of plastic which has tabs which break off at a very light touch.

La compré para mi yaris. Le quedó muy bien. Un poco la diferencia de color pero nada importante. La recomiendo.

El producto esta muy bien es igual al de la imagen le quedó perfecto al estéreo que teníamos y se ve muy bonito. Lo malo es que el tiempo de entrega fue más de 1 mes y medio.

Recomendable el vendedor, ecxelente producto

El producto es de muy buena calidad medida exacta y llegó intacto.