3MAccuspray Atomizing Head, 16612, Orange, 1.4 mm, 4 Count (Pack of 1), for Very Low-to-High-Viscosity Coatings

This works extremely well. I will save a considerable sum on paint because it sprays so efficiently.The instructions are awful. Let me repeat - the instructions are awful. Did I mention the instructions are awful?It exclaims it's meant for professional use, so I assume they assume you already know how these upper end guns work. I'm going to call 3M as I got the air pressure set by trial and error. The gauge they give you is worthless in my estimation but then I may not understand how to use it properly; an instruction issue. The mixing sleeve is also worthless to me because I don't know how to properly use it either. That's call #2 to 3M.If you're going to purchase this, you might as well get a boat load of those thin inserts and caps with the filter built in. You get 5 and realistically each insert / cap combination is good for one painting session. I mixed up paint and thinner at a 4:1 ratio using the oz scale in the mixing insert as my paint had no instructions for using it with a spray gun. All the other scales on the mixing insert are a mystery to me.If you mix up a batch and run out while spraying, you can reuse the insert and cap for some additional spraying if you use some common sense. The insert will be collapsed, so just use a screwdriver, etc to push it back down to resemble what it looked like when you started. Rinse the inside of the cap filter with some thinner to remove the crud that it caught before it entered the spray stream. Now mix and reuse as normal. Be forewarned that the insert won't be perfectly flat after a use, so the the mixing scale will be slightly off. Unless you're painting a Mona Lisa don't fret it.The 1.4 head is the only one I used for a steel primer and paint afterwards. I ordered a box of 1.4 heads because I suspected that's what I would end up using and I was correct. I sprayed two steel structures with primer one day, and cleaned the head. The next day, I used the same head to spray black enamel for one structure and then cleaned it again and sprayed white enamel for the other structure. It worked great. The gun is real easy to keep clean and the consumables on it are reasonable in cost.

I use this size the most on my Accuspray. Works great for spraying metallic base coat, single stage paints, and even clear coats. I don't paint a ton, but I average 3-4 complete vehicle paint jobs a year in an inflatable paint booth. This system with these heads isn't quite as nice as a 1000$ gun in a proper booth, but most of my builds are on the medium/high quality, just under a show quality job and this set up definitely does the trick

These spray heads will be used for finish coating my street rods. I use an enamel paint in solid colors. If I get rock chips or a ding I have little concern as my paint costs are low. These heads require minimal amounts of solvent for cleanup. If the pattern is degraded, you just install a new head and keep going. The Accuspray gun can be fitted with a number of spray heads to cover everything from primer to clear coat.

Works well

Works great for spraying vehichles

These work great in my 3M accuspray. I did drop one star because of the price. The price was better than most but still more expensive than I want to pay.

I’ve been nothing but impressed with these tips. Of course they come from a brand with a proven track record of quality. And the genius design of making the plastic so I can see through it is greatly helpful during cleaning. I’ve had my gun and tips close to a year now and I still love them. Have yet to pull out either of my other two guns even one time.

These are great!! At $5 each it is cheaper and easier to throw away after use instead of cleaning. I have cleaned and reused with excellent results as well.

These spray well i just wish I bought the 2.0 kit. This version has some quality and performance consistency issues

Me gustaría que el proveedor tuviera en venta también la boquilla 1.3 y 1.2

The media could not be loaded.  Does not fit