Draw-Tite 75362 Max-Frame Receiver , Black

Did not come with all 6 bolts...only 4. Not everyone has the factory bolts or are they still serviceable...the hitch is vehicle specific there is no reason the bolts are not also.

This item was exactly what we were looking for, you can't beat the price and you can't beat the value for the money. Would recommend this item to absolutely anybody.

Received hitch when promised.One reason I chose this hitch is that it was powder coated so it wouldn't rust. There was only a little cardboard around a portion of the tubular section of the hitch. There are several deep scratches and those areas will probably rust. That is disappointing, it should have been shipped in a box or some way to protect the finish.I know its a trailer hitch and you can hardly see it , however I don't want rust in time weaken the metal.As far as the hitch itself, it fit perfectly. Looks stronger than the oem one. I am happy with this purchase.

Installed this hitch on my '04 GMC 1500 2wd. With an impact wrench to remove the factory bumper bolts, this install can be done in about 10 minutes especially if you have someone to help you hold it in place. This hitch also has a nice little tab to the left of the receiver to mount a wiring adapter bracket like the "Hopkins 40975" so you don't have to screw it into the bumper.Note: if you have a trailer ball mounted on your bumper, you'll have to remove it first since the hitch sits about an inch below the bottom of the bumper, so you may want to start soaking it with PB Blaster or Liquid Wrench while this ships. I had an old rusted one that I had to cut off.

This is a direct bolt on hitch receiver. Was very easy to install. The hardest thing I had to do was remove the old hitch ball that was rusted onto my bumper. Already used it to tow an International Scout II just over 170 miles through heavy rain. I highly recommend this receiver.

fit my 2002 6.6' bed silverado 1500 perfectly. I needed an impact wrench to break the bumper's bolts loose. put the receiver in, and discovered I needed a deep 3/4" socket in my torque wrench to tighten the nuts down. 75ftlbs on each of those 4 nuts; + 110 lbs on the bumper bolts..

Solid and sturdy. Easy to install. Did it with help of my pre-teens. Didn't line up exactly but, with a little leverage, I was able to secure properly.

Quick, easy to install, 5 minutes.