CHIPTRONEX Diffuser X500 RGB CPU Cooler 5 Copper Pipes All Intel AMD Support

Brutally damaged and bent fins everywhere but It does what it says regardless. Average temperatures in Full synthetic load on my Ryzen 3 2200G are reduced by aproxx 20°C compared to stock cooler. Installing this on an AM4 motherboard was one of the most traumatic experiences I've ever had. But it worked fine after installation.Took me approximately 3 hours to install. 2 hours of which were spent finding an installation video of an equivalent CPU cooler. The included instructions are literally pointless. The 4 steps they've printed on a paper don't make any sense at all (Picture included)- AMD users, if you're coming from a stock cooler, you will need the mounting brackets that your motherboard came with. Make sure you have them before buying this cooler (or any cooler in general)- Watch installation video of Wraith Prim cooler, it has a similar mounting mechanism. Not the exact same but similar enough to understand.- You don't necessarily have to take your motherboard out if your CASE has enough clearence. Although taking out the motherboard will make things A LOT easier.- Detach the fan and the heat sink first, this will make installation quicker and easier. You can mount the fan back on again. (Take a picture of the position of fan first, for reference later) (Picture included)- Remove all your ram sticks. This will give you more room to work with. The cooler gas enough clearence for you to replace all 4 of the ram sticks after installation. So this is not a problem. (Picture included)- Removal is almost impossible. You can just un-screw the black mounting brackets and it'll come off instantly. That's the easiest (and the only) way you can remove this cooler in the future.- RGB can only be set to static colours (at least for me on gigabyte B450M DS3H motherboard) So don't expect any special effects.- I'm not sure about the quality of the included thermal paste, I used (and recommend) Arctic MX4.- The printed website on the box ChiptronexDotCom is dead. There's a probablity that the brand went bankrupt or something, Confirm to Amazon's customer care first if you care about warranty.

The cooler is very effective at keeping temps down. Currently using it with a ryzen 5 1600, overclocked to 3.9ghz. Cpu idles at 27°C idle and on full sustained load temps are around 68°C. The heatsink looks good and the fan isn't very noisy and the rgb on the fan looks great as well. The mounting mechanism for ryzen CPUs is just rubbish. You need some prior knowledge to get it mounted, I highly suggest checking out Youtube videos if you aren't able to mount it properly. Search mounting videos for antec coolers as they tend to have the same mounting mechanism as this cooler because Chiptotex cooler mounting videos are quite scarce. The motherboard needs to be taken out of the case for installation. But ones it's in, you'll face no problems. Performance is similar to coolers which cost around 50% more. Great value for money, totally recommend.

Bought it for my i7-2600k (not OCed) as replacement for my stock cooler which is still working fine but need some improvement in temps.On stock:Ideal : 48cLoad: 82cWith this cooler:Ideal: 38cLoad: 62cFirst received used item, Amazon replaced it quickly with new one, second time I received item have some bend fins but which can be easily fixed no issue.Fits in my cabinet (iBall) easily, installation easy for Intel.Go for it if you are on budget.

working very good im using Ryzen 5 2600 OC at 3.85Ghz this cooler cooldown my CPU temp. at 38°C to 48°C in Idle mode and normal using like Video and MP3 Music playback and also when im gaming Like GTA V and PUBG my CPU max temp. go to upto 52°C to 55°C im very happy with this CPU Cooler From CHIPTRONEX Diffuser X500 RGB CPU CoolerNote:- only one disadvantage in this CPU cooler You need to Detach Whole motherboard from case and after this u can easily fit this CPU cooler in your CPU.

I am using ryzen 3 1300x and on the stock cooler it was always 88° and above since summer started and I underclocked it to reduce temp and clocked it from 3.7 to 3.4 still it was approx 80 so I bought it and now I'm running my cpu at 3.8 - 3.9 at approx 64 (at 3.8 only 59° mostly)So I would recommend it to anyone who wants to upgrade from stock cooler and is on budget. Only problem is instruction aren't clear and for someone who's installing on an am4 motherboard for first time would be very hard to understand how to do it.

Got broken clip from amazon from Appario Retail Private Ltd sellerInstallation was easier as i have clip on already install though need to adjust the clip height using spannerOne should care full not to put maximum force rather use spaaner to lower the clip height Thermal paste is of decent qualityAmazon delivery time was spot on though package almost got tear from two side .Before installation i was getting 82Degree for 3.5 ghz ..After was able to achive to oc upto 4.5ghz with temprature not exceeded above 62degree so got satisfing performance.Got in discount in diwali sale though still good buy for 2k.After 1 month of use found cpu getting above 65 degree in max load games like pay back needed to undervolt cpu and also disabled 2 core to control the heat .for overclocking purpose will not recommend but at cpu stock speed it perform satisfactory

The cooler is very good for this price. With the stock cooler, the temperature of my pc goes to 84°C during video rendering. But after installing the Chiptronex CPU cooler, the maximum temperature during video rendering is 75°C (generally below 70°C). The RGB looks very good. The only Con of this cooler is that, they does not provides AM4 brackets. You have to use the brackets comes with the motherboard.