3D Printer 2 in 1 Dual Extruder Prusa i3 Large size 260x 300x 300mm Print Single/ Dual/ Mixed/ Graded Color Print Resolution: Printing Size: 260x 300x 300mm Print accuracy: 100 microns (0.1 mm) Printing Speed：Normal: 30mm/s, Max.: 60mm/s Layer Thickness: 0.1-0.3mm (up to you) Filament: 1.75mm, PLA, ABS, WOOD, HIPS, NYLON Hardware: Heated Bed: 3mm aluminum alloy platform Temperature: Max 100 degree centigrade (Ready to print different filament, PLA, ABS, WOOD, HIPS, NYLON Extruder: Max 250 degree centigrade Control board: Support double extruder, such as one nozzle mixer color printing, double nozzle two color printing. LCD screen: 2004 LCD Module Control , Interface Power supply: With UL Certification Input: 100-120V, 6.8A/ 200-240V,3.4A 50/60Hz Output: 24V/14.6A Power cable: with UL Certification and ground line. Software: With the ability to use both open-source and commercial software, such as Cura, Repetier-Host, or Simplify 3D, the Maker Select Plus 3D Printer is compatible with Windows, Mac OS X, and Linux. Application: Apply to many fields, such as aerospace, architecture, art, automotive, engineering, jewelry, medicine, manufacturing, product design,education and so on What's in the Box: Athorbot brother Couple 3D printer half-assembled kits Assembly instructions, user manual and warranty card 100g free PLA filament sample Spare screws Tools Enjoy your safety printing journey now! All of our Power supply and Power cable with UL Certification.
A**N
Absolute garbage dressed as something it's not.
My first impressions after 1 day: Avoid it.The thing comes with test prints which were done on the machine (allegedly) but the firmware on the control box is not even the right firmware for dual extrusion. Half the menus are missing. Also, it won't use the latest version of Cura, it makes you use V1. We are on V3.5 now but this seems to be stuck many years in the past. Even following these instructions, I could not get the dual extrusion to work. And when you upload the firmware from the disc (not easy) it still doesn't have the menu option for mix colour print like the instructions say it does. I'm pretty sure whoever wrote these instructions wrote them for a different model. The screw sizes were often wrong, sometimes in the same sentence it would tell you to use two different screw sizes! Also, the Z stop switch is not great, it should have an L bracket which contacts it properly to stop the gantry smashing into the glass bed, but it doesn't, and the switch failed on me a few times. The bed levelling is a nightmare because of the inaccuracy of the Z switch. The world's tiniest screws "hold" it in place and the gantry slightly knocks it each time you press Home, so you have to level the bed AGAIN.I managed to get 2 single prints so far, with a LOT of messing around (9 hours worth) which look good, but I had to make a few mods with a tin can and other things to help the nozzle heat up (which takes forever).I'm pretty sure I'm sending the thing back at this stage.Very tired and unhappy.
Trustpilot
1 month ago
1 month ago
