Air LiftWirelessOne 2nd Generation + EZ Mount On-Board Air Compressor with Mobile App - 25980EZ

So I bought this unit because its a bolt on kit and its a wireless control. I didn’t want to run a ton of wire in the cab, find a location to put in a switch and gauge, dill my dash, ect. These guys really had this figured out to make it a simple and as easy as possible.the unit works as advertised. It came with all the hardware to pretty much install it anywhere. I would say the hardest part was picking a location for it that isn’t going to stick out to far down past the frame. Couple of things I don’t like about this kit is the pre made harness doesn't come loomed, the ground wire for the compressor has to be bolted to the frame (I much rather have the ground wire be the same size as the power wire for the compressor so its a direct route back to the battery), and the compressor is kinda noisy. But all in all its seems to work fine I have a loaded truck and the unit filled the bags up fairly quickly. So I had to buy some loom but I'm happy with the purchase. let’s see what it does for longevity.

Easy installWorks as expected. Low noise level, keeps truck level as needed while driving

The air bag package was easy to install and works flawlessly.

The compressor works perfectly and installed easily. I ended up installing under my back seat instead of the where the instructions suggested as I live in Wisconsin and didn’t want the salt and spray to wear out the compressor parts. I was concerned about the noise in the cab but after using it a dozen times that is no longer a concern. All things considered this runs fairly quietly and with very little heat.

I tow a 31' travel trailer (6038 UVW), and I also pick up a 1 ton pallet of wood pellets in the bed of my truck. Having the AirLift 88299 LoadLifter 5000 series airbags installed on my truck makes leveling my truck simple. And if you are going to install the airbags, I also highly recommend installing the AirLift 25980EZ compressor which makes airing up and airing down the airbags as simple as it gets. Installation of the compressor is pretty straight forward, just follow the included instructions or watch the video AirLift has on their website. There really is no need to have it professionally installed, if you can change your own oil and are familiar with some hand tools then you can install this compressor. (Please keep in mind that airbags do not allow you to carry more weight in your truck bed or tow more than what your vehicle manufacturer recommends, they are just a tool to help you level your truck when you have heavier loads on). The only complaint I have is that AirLift states that this EZ mount air compressor can be mounted on the frame rails of my 2020 Toyota Tundra, but there is no way that it fits on the frame rail as there is not enough room between the body and the frame rail to mount it; there is only approximately 3.6 inches in-between the body and frame. After contacting AirLift customer service I ended up mounting it to the front wall of my truck bed and routing the wiring cables and air hose through the bed drain plugs on the front bed wall. At least now the compressor is somewhat protected from the elements under my tonneau cover. The best part of the compressor and airbags is no more sagging bed when towing or hauling.

Not cheap, but after trying an overseas copy that did not work properly this is a no brainer. It is installed on the aft right frame of my F-250SD and the remote works with no issues form the drivers seat. The app also works with no issues and was very quick and easy to set up. It comes with good wire, although I just spliced it to the 12 gauge wire I already had run for the other compressor.I do wonder why a cover is not included with this compressor to help keep dirt and water off of it. It would seem that it would be pretty easy for Air Lift to design an inexpensive plastic cover. I may at least make a shield to place in front of it to give it a little protection.Not cheap but it works perfectly. Recommended.

Okay.... lol, this thing is rad. I installed it on my 2010 F-350 Lariat Dually with an 8' bed. I mounted the unit on the right side of the vehicle as there was more room and less cabling. All in all you are only drilling 3 holes, but I did utilize one of the predrilled 3/8" holes in the frame. So I had to drill only one hole, because for the ground, I again utilized another nut that was within reach, sanded it down to the frame and routed the cable.This took me about 3-4 hours. Why that long, I was just being super OCD and wanted it to look good. I put the electrical wires through plastic sheathing, zip tied along the way and routed to the right hand side battery. All in all, if I had to do it again, I could probably do it in 2 hours now that I knew what I was doing and how I wanted to go about doing it.The instructions are so-so. If you have a decent mechanical proficiency and know how to splice wires, you are going to be just fine.Routing the air hoses was simple and clean. All in all very impressed. I use the app instead of the remote and it is awesome. It makes raising lowering and finding the "sweet spot" very simple. I cruise with 9 PSI in the bags and with my bags I have a max PSI rating of 100 PSI. I jacked the PSI on the app to 95 PSI. From 9-95 PSI it raises the rear end of the truck with no load 1 7/8". I have yet to hook up my trailer to it, but after a week of cruising around and finding how my truck rides, I'll have the trailer connected soon.Very impressed and happy. Highly recommend.

great system work great.