🔋 Power Up Your Projects with Style!
The Yibuy 10 x DC Power Right Angle Barrel Male Jack Plug is a versatile solution for connecting power in confined spaces. Each adapter measures 10 inches in length and is compatible with the standard 5.5 x 2.1mm DC power interface, making it perfect for DIY projects and professional setups alike. With a pack of 10, you'll have plenty of options to keep your devices powered and organized.
W**7
Great Replacement cable for DJI FPV or Fatshark Batteries
If you use the FuriousFPV Smart Power Case V2 or Fatshark batteries for the DJI FPV goggle the power wire is a big snug. Overtime the power cable will fail because the tiny silicone wires inside the cable will snap. So, this cable is my best solution because it extends the wire longer and prevents the wire from breaking. The plug has a tight grip and you do not need to worry about it coming off. I have seen reviews of other vender with plugs that are loose, but these works well for me.
G**N
Great for most 12v products
This is the correct size for 95% of things that use a 12v power plug. I have also seen this same size used for other voltages as well and it is really handy to have these laying around to convert old wall warts and batteries to work on different products.
4**1
Rapido
Buen producto
J**D
I'd rather have silicon.
These are plastic rather than silicon, which makes it a pain to solder because the plastic melts.
J**I
Great
Great Product
F**R
These are pre-tinned, though not always perfectly.
These are mostly fine. The pigtails are pre-tinned, which is helpful, but every now and then one of the pigtails isn't perfectly cut or tinned.
A**N
Cannot tin the wires, terrible quality copper
These cables were very frustrating to use. I am a product development engineer in medical electronics, and solder various kinds of wires all the time. I tried to cut and tin the wires in these cables with a high-quality soldering iron and solder, and various fluxes and it was basically impossible. The wires come pre-tinned, so if you are willing to keep the length, they will work. I wanted to shorten the cable and it was impossible to get a good solder joint. The wire insulation melts like it's made of cheese, the copper surface just burns instead of wetting to the solder. To get even a poor solder joint I had to sand the wires with sand paper.
E**N
Product as Described. No complaints.
The barrel jacks are decent quality, better than some of the solder-able right angle variants available on Amazon. I used a couple of these to turn some 1000mAh Turnigy 2S lipo packs into suitable backup batteries for my Fat Shark FPV setup. Quite happy with the results.
S**\
better than expected. good value
Reasonably well made good value for the price
Trustpilot
2 months ago
1 day ago