Desertcart purchases this item on your behalf and handles shipping, customs, and support to Australia.
⚡ Upgrade your legacy gear with future-ready speed!
The StarTech.com IDE2SAT2 adapter bridges the gap between old IDE motherboards and modern SATA drives, enabling seamless connection of 2.5/3.5/5.25 inch SATA HDDs and optical drives without additional drivers. It supports SATA 1.0/2.0/3.0 and IDE 33/66/100/133 standards, includes a power cable, and comes with a 2-year warranty plus lifetime free technical support, making it a cost-effective, reliable solution for extending the life of legacy systems.
| ASIN | B00EOJNGC2 |
| Amazon 売れ筋ランキング | パソコン・周辺機器 - 64,035位 ( パソコン・周辺機器の売れ筋ランキングを見る ) エンクロージャ - 402位 |
| GTIN (Global Trade Identification Number) | 00065030852258 |
| UPC | 065030852258 |
| おすすめ度 | 5つ星のうち4.7 1,917 レビュー |
| カラー | ブラック |
| コネクタタイプ | SATA |
| コネクタータイプ | SATA |
| パッケージ商品数 | 1 |
| ブランド | StarTech.com(スターテック) |
| ブランド名 | StarTech.com(スターテック) |
| ポート数 | 1 |
| メーカー名 | スターテック(StarTech.com) |
| メーカー型番 | IDE2SAT2 |
| 主電源のプラグタイプ | プラグがありません |
| 互換デバイス | ノートパソコン |
| 保証タイプ | 限定的保証 |
| 商品の用途 | personal |
| 商品の重量 | 0.03 キログラム |
| 商品寸法 (長さx幅x高さ) | 7.6 x 2 x 2.3 cm |
| 商品本体サイズ | 7.6 x 2 x 2.3 cm |
| 商品用途・使用方法 | personal |
| 型番 | IDE2SAT2 |
| 外部機関認定情報 | FCC, CE |
| 対応デバイス | ノートパソコン |
| 色 | ブラック |
A**ー
HDD変更に
旧式3.5インチを２．５インチHDDを変更に使用した 動作良好でした
A**様
在 DOS 環境下，sata 光碟機終於不會老讀不到，甚至當機…
想在舊電腦上，猶其是 DOS 環境用 sata 光碟機，就一定要找這個專門的轉接卡才行！不然讀取會一直出問題。接光碟的話，不只是要選插 M/S/C 的跳線，那個 ACD 跳線也要插上。轉卡上的插座排列可能要注意，也許會感覺整線不太容易。
A**ー
あると安心です
持っておくと役立ちます
L**F
いまいち
使えなかかった
C**R
Beware the pin header
This product is fantastic. Much better than the cheap options available on facebook. Upon receipt I was blown away by the weight of the product compared to the cheap one I was sending back. Typical Startech quality on full display here. The Good: - Works seamlessly in an original xbox to allow for the use of massive SATA drives (I used it to max out the 2TB limitation of the hardware) - Made with good materials - Includes a molex passthrough to chain the adapter between a source and another drive - Includes jumpers to allow master/slave/cable select - The power adapter attaches parallel to the board, freeing up space in otherwise craped situations The Bad: - Both sides of the board is left entirely exposed, inviting shorts. Would highly recommend taping off the back of the board, regardless of use - The power cable uses the mini-molex plug used by legacy floppy drives, meaning you need to use the included cable to power the adapter. Not a deal breaker, but extra, unnecessary, wires always suck The Ugly: - As opposed to a standard plastic ATA socket, this adapter uses a pin header. Your IDE ribbon will fit fine, but it seems to attach muss less sturdy This device is 300% of the price of competing cheap options, but it is largely worth it to have a one-and-done solution. If you're looking to upgrade your original xbox hard drive in 2021, you really can't go wrong with this.
K**Y
Super produkt
Najważniejsze, że ze starym kontrolerem IDE nowy napęd DVD działa, co prawda jeden - tak jakby przejściówka zapisywała sobie go (ten pierwszy napęd podpięty do niej) w pamięci i już żadnego innego nie chciała rozpoznać (jakaś metoda na jej reset?).
R**N
Works very well. Fast and Highly recommended.
I used this with a SATA HDD to upgrade an IDE based audio recorder (Yamaha AW1600). It worked well with the two drives I tested. These were a Vertex 2 SATA II 60GB and a Samsung 840 EVO 250GB. Having tried two other SATA to IDE interfaces, this was the only one I found that worked properly in my particular scenario. The other interfaces I tried either did not work fully or were very slow. I have not done exhaustive testing but it does appear that this is a very good product.
R**O
Ottimo
Testato funziona perfettamente.
L**A
OK
OK
Trustpilot
2 months ago
1 month ago