43"W x 33"D x 30"H **** NEW IMPROVED ***** MADE WITH .080 THICK ALUMINUM Microfab Company generator enclosure was designed and built with the customer in mind. You will sleep at ease knowing that the generator will be secure and protected from outside elements. Generator enclosure is Powder Coated Aluminum to reduce corrosion and weight. Comes complete with four mounting holes at the base of the unit to lag and secure the enclosure and generator in cement or paver blocks. To ease access for re-filling the generator with Gasoline, we added double hinge front and top with notches on the sides to hold the door open. Please note, leaving the side door closed will result in damage to your generator. KEEP SIDE DOORS OPEN WHEN GENERATOR IS IN USE. Should you have CO2 detector,make sure the exhaust is directed outside of the enclosure otherwise your generator will turn off. In the front we have spring loaded handle with two (2) hasps for pad locks to secure the access to the generator from intruders. Now you can leave your generator outside and have more room in your garage or shed. In the back of the enclosure you have four (4) 1 3/4" Dia. holes for your cables and 3" Dia. hole for back exhaust for some of the generators. For units with side exhaust we have the side doors that have to remain opened while operation. Be sure to have licensed electrician install your cables and necessary boxes for electricity to your home from the generator. When the generator is not in use you could close the side doors and secure them with two 1/4"-20 bolts on each side and locked with pad locks. *********SOME ASSEMBLY REQUIRED*********** PLEASE NOTE: PLEASE CHECK PACKAGING UPON RECEIVING. IF PACKAGING IS TORN PLEASE TAKE PICTURES AND SEND TO ME. MAKE SURE NO PARTS WERE DAMAGED IN TIME OF TRANSIT.
R**K
Don't Waste $1000
Damaged way over-priced item that company won't stand behind! It is ridiculously hard to assemble because of strange placement of attachment (pre-drilled) holes. Poor design for that reason. I received the item with a rivet that was broken off. The rivet is needed to keep the front panel in-place. Company said they would discount $30 and send a replacement part which wouldn't work because the rivet was broken off/out! This was 5 weeks ago and nothing but silence since! Don't waste your time and big money on this item and company that will not respect or appreciate your patronage!
A**R
I was surprise how well this enclosure is constructed.
So, this item is 80 lb. plus shipping I would say about 100 lb. total, not 235 pound as describe, aluminum material white powder coated excellent packaging in all detail, all the parts fit together like a champ just have a roll of gorilla tape its like another person helping you. This enclosure you must put in your will because will out last anybody and according to the seller is built in the USA & remember all the good thing cost money. Ty
A**O
Clever Design
The enclosure is perfectly designed to allow the operation of a portable without having to move it out of the enclosure. My only complaint is that the assembly instructions are confusing so much so that I had to hire a furniture installation company to assemble it and even then it took them 1 1/2 hours at a high cost.
M**N
Poor quality and over priced
Instructions were very vague, bolts did not line up with bottom floor panel.. type of bolt supplied were very hard to get allen wrench on. Had to redrill holes (paint thickness) to get bolts to fit predrilled holes. Takes two to lock the cover because of the bottom panel issue. Received damaged, lasp hook for padlock was bent. (not damaged in shipping, package was fine). Not worth what they are charging.
L**.
Assembly was touture
Product is perfect for generator. However, this was the most difficult product to assemble.
R**T
Good product - terrible instructions
I read about assembly instruction issues. The instructions are terrible and could be fixed so easily but alas. I spent about 20 minutes reading the instructions and figuring out how the pieces go together. Assembly was not actually difficult. I installed the cross bar before the back because it held the sides in place. (I was working alone.) All of the holes were in the right place. I had to twist some of the screws through the paint but not a big deal. The pieces went together very well and the final product looks great and feels very sturdy.I did have 4 left over screws and nuts at the end. I think they are intended to screw the side panels closed.
K**R
Best way to protect and secure your generator.
After trying to find a shed to keep my generator in,looking for one that wasn't to tall it was going up on my deck, typed generator shed in Amazon, this shed came up.This shed is Awesome,it is set up ,generator in.now the generator is locked up until it is needed.Very happy with this product.
N**E
Perfect
Perfect so I can keep my generator outside all year, run it in the rain if needed and keep the rats from hiding in the generator at night when it’s not running! My son has now purchased one for his house
Trustpilot
5 days ago
3 weeks ago