CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality CR-10，CR-10S，CR-10 Mini,Tevo Tornado 3D Printer

This replacement part worked well in a pinch. I will probably buy a creality certified part next time, but this definitely kept my CR10 running when I needed it most.

Printing like new again!

This worked for me for about 6 months until one of the fans stopped working and the other fan’s blade snapped off. Now it vibrates too much to get accurate prints.

This was a direct replacement for my CR-10 mini. As others have said, you will need a Bowden tube connector. It might be possible to reuse the old one but I wouldn't recommend it. Another option would be to use your original Bowden tube if it's still in good shape. Either way, a great replacement and a slight upgrade. Mine came with a silicon cover for the hotend. Have done several prints with great results.

The product has been fantastic for me. The only complaint I have is that to install it with the new bowden tube you need the connector that attaches the tube to the feeder. It's a single use part so I don't know why it wouldn't be included, knowing it's needed for this to install. Once I ordered that part and put it together, it's been working fantastically!

Fixed me up pronto !

This is an excellent replacement unit. It is a complete unit with connector that just plugs in. Great value, too.Unfortunately what I received had a wrong wiring at the connector and it does not work. The two cooling fans are wired reversed and the wrong one comes on and that is a big problem because the cold-end gets no cooling and immediately clogs the whole hot-end and making it useless.The reason for this problem is apparent. Originally the radial nozzle fan had red/black wires and the cold-end fan had blue/yellow colors and that is how the connector is wired. Somehow these fans have different color wires and they are now reversed, yet the connector is still wired with the same color wires.The wiring error explains why there are great and bad reviews with people complaining -- they are all fan and temperature issues.So, I suggest you check this before putting in the filament by raising the nozzle to about 80 degrees and making sure the front cold-end fan comes on. If the side radial fan comes on instead, then the wiring has to be corrected at the connector. It is no fun using a soldering iron, though.

Muchas Gracias, funciona perfectamente

Perfect replacement for a creality cr10s. There's is no indication that this is made by creality, everything is branded as hictop and the box displays an outlook(?!) email address. It's a bit weird but the thing seems to work well and is identical to the a real creality hotend.

After my original hot end would not keep temperature I had to look for a replacement, I came across this one and after reading the reviews decided to give it a go.The Hot end arrived the next day it was very easy to install onto the printer, I did replace the nozzle from the 0.4 it came with to a 0.6 and put a different bowden tube and I have not had a bad print yet.

Great replacement part and would order another in a heartbeat

This item is very good and is producing fine prints

Part fan did not work. Replaced with fan from original hotend unit.