M68 Wireless | Ultra-Fast and Light Gaming Mouse

Pressing and holding both side buttons + left click for 3 seconds shows the current battery level by the color of the indicator light as: red, orange, yellow and green that indicate below 25 %, 50 %, 75 % and 100 % respectively.The switch underneath has 4 positions: OFF, CPI, PR and DT.The switch into CPI mode and pressing the bottom button repeatedly adjusts the mouse sensitivity shown by the color of the indicator light as: red, yellow, orange, blue, pink. light blue, green, gray that indicate 400, 800, 1200, 1600, 3200, 4000, 7200 and 26000 cpi (counts per inch) respectively.The switch into the PR mode and pressing the bottom button repeatedly adjusts the polling rate (how often the mouse location is sent out) shown by the color of the indicator light as: red, yellow, blue and green that indicate 125 Hz, 250 Hz, 500 Hz and 1000 Hz respectively.The switch into the DT mode and pressing the bottom button repeatedly adjusts the debounce time (the delay of the effect of a mouse click) shown by the color of the indicator light as: red, blue, green and pink that indicate 2 ms, 4 ms, 8 ms and 12 ms respectively.Lift-off distance (the height at which a mouse's sensor stops sending a signal when the mouse is lifted) is changeable from 1mm to 2 mm (red, blue light). Motion Sync (synchronize the sensor data capture timing with the current polling rate) can be switched OFF and ON (red, green light).SOME SPECS:Shape: SymmetricalSensor: Pixart 3395Weight: 53 gMain switches: Huano Transparent Blue Shell Pink DotGlides: PTFE glidesSurface: Matte UV coatingSettings: On-the-fly, no software neededCPI settings: 400–26 000Polling rate: 125/250/500/1000 HzLift-off distance: 1 mm / 2 mmDebounce time: 2/4/8/12 ms (≥ 8 ms recommended and covered by warranty)IPS: 650Max acceleration: 50 GConnection: 2.4 GHz wireless / USBConnector: USB-A to USB-C cable + Adapter + DongleCable type: 1.8 m CHERRY XTRFY EZcordBattery: 300 mA (up to 75 h)OS: Win XP/Mac OSX 10.1 or later