EZDIY-FAB Shield ATX 24-Pin 180° Angle Adapter, Infinity Mirror ARGB, Black | Reduced Cable Strain, 180 Degree Adapter, Infinity Mirror ARGB, 5V 3-Pin ARGB Sync, Clean Cable Routing, Showcase PC Builds

Updated Review (May 5, 2025) After leaving my original review, the company reached out and provided a replacement unit at no charge. I’ve installed the new one in the same high-performance system and, so far, I haven’t experienced any of the issues that occurred with the original adapter. No BSODs, USB dropouts, or network card detection problems — everything seems stable after multiple cold boots and reboots. It’s possible my original unit was just faulty, and this replacement is performing as expected. I’ll continue to monitor its behavior, but at this time, it appears the problems I encountered were specific to that first unit. I appreciate the quick support and hope this updated experience helps others decide what’s right for their setup. I installed this EZDIY-FAB 24-pin ARGB angle adapter on my custom-built system primarily for aesthetics and cable management. While it looks sharp and the angled layout is functional, this device introduced serious and unexpected problems that made my system unreliable. I would strongly caution anyone using high-performance hardware to avoid this adapter entirely. Original Review (March 24, 2025) My system specs include a Gigabyte X670E AORUS Master motherboard, AMD Ryzen 9 7950X3D CPU, ASUS RTX 3090 GPU, TP-Link 10GbE network card (TX401), Corsair HX1000i power supply (ATX 3.0), Corsair H150i ELITE LCD XT AIO cooler, and several Corsair accessories including the K70 keyboard, MM800 RGB Polaris mousepad, and iCUE internal USB hub. Everything is powered through a Corsair PSU using multi-rail OCP mode. After installing this adapter, I started experiencing a wide range of issues that I initially couldn’t trace. I encountered frequent blue screens during startup, USB devices randomly disconnecting or failing to initialize, and my 10GbE network card would sometimes vanish entirely from Windows until I performed a cold reboot. iCUE devices also became unstable or failed to load altogether. In some cases, my system would hang during POST or fail to detect hardware altogether. It was a frustrating and time-consuming troubleshooting process. Eventually, I suspected the ARGB adapter and removed it from the system. Immediately after doing so, all of the above issues stopped. I’ve since performed multiple cold boots, resets, and shutdowns without a single failure or device dropout. This tells me the adapter was almost certainly introducing instability — whether due to poor power delivery, electrical interference, or unreliable PCB design. Even though the product description claims ATX 3.1 compliance, I don’t believe it’s safe or reliable for use in high-performance systems with sensitive USB and PCIe devices. While the product might work fine in lower-power builds or purely aesthetic setups, I cannot recommend it for enthusiast or workstation-level PCs. For the sake of system stability and long-term hardware protection, I suggest skipping this product and using a non-RGB 24-pin extension or a trusted cable mod from a reputable brand instead. I’m relieved this didn’t cause any permanent damage, but I won’t be taking that risk again.

Good quality. Fits well but did land slightly on neighboring front panel connector. Mod down.

Works well, but looks off for me as my case holes are somewhat off. Buy with caution and a prayer. Hopefully it fits ur build as it is a nice addition.

People that don't research the fitment with their case are downvoting the product which is not okay. That is their problem, not the product's. As long as you have room to fit it, it does the 180 degree angle extremely well and looks amazing! It fits great in my case. Build quality is top notch as well. I was surprised at how well it's built. The colors are amazing with the ARGB features, though I prefer static. Personal preference, but it can do many things. It functions as it should and the connectivity is strong. Very strong which made the install a bit hard since the 24 pin MB connector is always hard to push down and install, which you have to do twice. Other than that, I'm very happy with my purchase! Love the infinity mirror and the side ARGB slits. Would highly recommend if it fits in your case!

I'm obsessed with how nice this looks, how solid it feels and how much it cleaned up my cabling issues. Really classes up the build a bit. The infinity mirror is crisp and adds a lot of interest in a place that is usually boring cables (before and after images included). The shape is perfect for redirecting the cables to behind the motherboard in cases with storage behind the mobo. Branding is tasteful and limited. Only minus is that it does not easily seat on the motherboard connection. I had to put a lot of pressure on the connection in order to fully seat it with a secure connection. Cable-side also needed a lot more force than typical, but was less concerning than stressing an unsupported part of the mobo. Very snug. The quality feel and look to this piece (and others I've been collecting) from EZDIY-FAB have increased my trust in this brand more than the thousands of anonymous computer parts brands on Amazon. Highly recommend.

Man I wanted to like this, it looks beautiful and the light sync is amazing but it caused issues with my motherboard booting on installation. If you are using a newer motherboard then it may cause issues with getting power even when fully seated. Tried on an old board and it did work for a bit so mostly compatibility is an issue.

I wanted a 180° adapter for the 24pin atx power cable going from my Corsair HX1200i PSU to my MSI x870e Carbon WiFi motherboard in my Fractal North XL case. I wasn't meeting it to be all RGB, but this works perfectly and looks nice! It plugs in all the way unlike some other reviewers see with theirs. I verified with a camera all around it. I will say, the lack of a "click" made me question if it was plugged in or not. And I felt like I had to push harder than I should have. But it fits and all is well. I recommend they make a clip to click and some indirect control to unblock it when removing the device - I think that would solve most complaints. This plugs into one of the newer 5V 3-pin ARGB headers on your motherboard. I haven't messed around with customizing the light yet, so I can't comment there. But it does make pretty lighting effects by default. I'm sure it'll be fine when I get to it. So far, no problems. I'd recommend and would buy again.

Fit's perfectly on a Msi MAG X870 Tomahawk motherboard paired with a Montech King 95 case.

エアフロー改善に大いに役立ちました。 見た目もすっきりしていい感じです

It's tight and secure. I can adjust and sync RGB with my mobo. I'm very happy with the product.

It works really well.

配線がすっきりしました