One Oil Filter Plug Fits OEM Mopar Oil Filter and after market brands (as long as it has the wrench style bottom) Oil Filter not included The Plug is for filters that you have to tip to the side to remove or install. You need the plug so the oil doesn't drip out when you tip the filter to the side to get it in place. The Plug is Powder Coated Green Machine milled out of aluminum The plug has a handle for easy reach and minimal threads for quick twisting on and off.
K**H
Works but could be better !
First off its made out of nice aluminum. But the first time i used it i screwed it on the filter and couldnt get it tight enough to keep the oil from running out of filter. I wasnt as bad as if i never had it to put on the filter! After getting the filter out i tried to take it off but i couldnt get it to come off the T handle you use to tighten it was loose so after i got it off with a little work I cleaned it up took the nut off that held the handle on and got out some locktite and replaced the handle let it sit overnight to dry then I gave it a twist and then the top of the T handle turned so I took that off and locktited that! Now it seemes ok but we will see at next oil change !
E**G
High Quality Tool
This is a high quality metal tool as opposed to the cheap plastic equivalents available for about $5 less. I hate low quality tools, so I don't mind the extra few dollars for the extra quality. I can tell I am going to love this tool. I have always made a big oil leak mess when changing the oil on my 2500 Ram diesel. This tool will eliminate that mess and I won't be dreading the next oil change. My thanks to whoever thought up this tool. Hope you make lots of money off your idea.
K**I
It simply works
Makes a messy job almost easy and most certainly clean. I thought about a product just like this after the first time I changed my oil and filter. Well made product except for the way the T-handle is attached. The instructions are clear the handle will come loose if you attempt to remove it from the filter with the handle. It will unscrew. Still worth every penny.
J**O
A must for the DIY Ram 2500 owner.
This plug does what it should to make your Ram 2500/3500 oil changes less messy. Just make sure you add Loctite to the T-handle retaining screw and tighten before using for the first time.
J**Y
So close to being good.
This adapter is a great idea and has potential.The top part the actual handle spun loose when I went to use it.After that I never used it again bought another brand of adapter for my Ram.
J**C
Better option than spending $30+ for others
Quality design, be sure not to over tighten per instructions!* Screw on holding onto outer edges of green plate with 15 flats. Don't UNSCREW using Tee handle either as others have done and complained in reviews about T-handle becoming loose. (The reason for NO OVER tighting is because the threaded nipple is pressed into the plate. Follow instructions and works fine.....DON'T BUY THE RED PLASTIC ONE, tee handle could break if dropped and people claiming that the plastic sealing area becoming cracked.
K**G
Chrysler tech approved!
Fits the factory filter beautifully and makes things so much cleaner. Strongly recommend disassembling and using permanent thread lock on the T handle bolt.
M**H
No more mess
On a Ram 6.7 to remove the oil filter you have to tilt it 90*. Doing that spill’s oil all over the tire/frame/shop floor. This tool plugs the filter letting you remove it mess free. This is a must with this truck if you plan on servicing it yourself.
Trustpilot
3 weeks ago
2 months ago