Multitool, 18 in 1 Camo Multitool Pliers with Fire Starter, Window Breaker, Whistle, Stainless Steel EDC Gear with Sheath - Perfect for Survival, Simple Repair, Camping

Recently, I read an interview with Mr. Tim Leatherman from 2019 in which he stated about the Leatherman clones coming from China, "The price is about one-tenth of ours, but the quality is about one-twentieth. Nevertheless, the day is going to come when the price is 50 percent of ours but the quality is 80 percent." Well, unfortunately for Mr. Leatherman, that day is here. The Leatherman Wave's patent has expired, and now the opportunity for a true Wave clone is possible. Enter the Flissa 16-in-1 multitool. This is the closest to a Leatherman copy I've ever seen, along with the Ozark Trail Multiforce, and the price is about 25% of the Wave and the quality is near 90%, at least on the particular Flissa multitool which I've received. Results may vary. I'll get to the 90% in a minute. Compared to the Ozark Trail Multiforce, the Flissa is far smoother to fold and unfold, the liner locks are much less stiff, and the Flissa features replaceable wire cutters and a precision glasses screwdriver, while the OT Multiforce does not. And the Flissa is cheaper to boot. Now for the mandatory Wave comparison, I will admit that I no longer own a Leatherman Wave. At one point, however, for about two days, I did. I decided to return it based on the buyer's remorse associated with paying over $120 for a single tool. Therefore, I don't think I'm qualified to compare this Flissa tool to the Wave, but I must say that the Wave was a fine tool when I handled it, although definitely not fine enough to warrant a 4x price differential from the Flissa. Anyhow, I digress. On to the actual tool itself. The black coating is painted on as opposed to being oxidized black. This means that over time, the paint will chip off and the tool will be less black. Leatherman paints some of their multitools as well, such as the Skeletool and Signal. I don't think it is a problem. The only other problem with this tool is that if you order the black version, prepare to sharpen the serrated blade, as the blade is painted over upon arrival. This wasn't a deal breaker for me. I can sharpen a blade if it means saving $100. These issues could likely be avoided by buying the plain stainless steel Flissa, but I like the look of the black one better. Those are the only reasons I would say this tool is 90% the quality of a Leatherman Wave, based on my limited experience. That, and the Wave using slightly better steel. I don't notice a difference. I can say for certain, however, that this is the best copy of a Leatherman Wave I've found so far, and while some people may deny it - probably due to the embarrassment over having spent $120 for a single tool - the Flissa seems like a very good alternative to more expensive options. Hopefully this can be a wake-up call for Leatherman to stop overpricing their tools and start truly innovating again.

I was hesistant to buy this tool since there weren't a lot of reviews. I have another similar looking Wave clone from another manufacturer that I ended up sending back. I purchased two of the Flissa 16-in-1 multi tools at the ame time. The quality control between both tools is excellent. Both tools open to the pliers easily. The external knives, file, and saw are very easy to open with one hand. The internal tools are relatively easy to get out during first use. I would imagine that they will get even easier to open with time. One tool had slightly tighter internal tools, but I didn't bend a fingernail trying to get the tools out. Both multi tools can be operated easily without requiring a lot of breaking in. I am happy that I purchased two of the tools. I am keeping one, and putting the other one at my parents house for weekend fixes. I wanted a low cost tool that I can put in my pocket and fix things as I come across problems while walking around. I have multiple multi tools from Leatherman and SOG. I feel like the Flissa multi tool is an excellent low-cost option if you don't want to spend a lot of money on a name brand, expensive multi tool. I will be recommending the Flissa multi tool to folks that want a "beater" multi tool or need a backup tool.

Pros - the individual tools overall are great. Compared to the Wave, the scissors are larger and easier to handle with a smoother operation. Cons - although there are hold cut-outs for single handed use, the blades do not budge when trying to perform one-handed blade action. Therefore the tool is a 2 handed operation. The triangle cut-outs on the handles are unnecessary and provide less comfort on my hand compared to the Wave which has a solid steel handle without cutouts. Also, the universal 1/4 bit is a great idea however takes up too much room on one end of the tool. Thats why the L company has thinner, proprietary bit kits.

resolves a lot of small issues when you are out and about

It's no secret that this is a clone of the Leatherman Wave, and it's a pretty good one. One improvement they made though, is the inclusion of a full-sized 1/4" bit driver instead of Leatherman's proprietary one. This is a significant improvement, because it enables the use of standard 1/4" driver bits, which are inexpensive and available everywhere (the Leatherman bits will also work if you prefer those). Ordinarily, another advantage of a 1/4" bit driver is that it can also be used as a nut driver for 1/4" hex nuts and bolts. This is handy, because 1/4" hex is a very common size, even in countries that use the metric system. For example, anyone who has built or modified a PC will be familiar with the industry standard machine screws that have a 1/4" hex head. I was very disappointed then, when I saw that the nut driver on this multi-tool is cut off at a rakish angle (see photo). I guess they thought it looked cool. Sadly, this pointless cosmetic design choice has now rendered the driver incapable of being used as a nut driver, so it has one less tool than it could have had. This minor irritation aside, it is a very good multitool for the money. It's about 90% as good as the Leatherman at about 25% of the price. I did find that the plain edge blade did not lock fully the first few times I tried it, but manipulating it a few times broke it in, and it now works well. It also does not have a pocket clip or lanyard loop, and is sadly not compatible with the Leatherman ones. Other than that, this is an amazing deal for the money.

Figured I'd give this a try as a lower end version of a Wave+. I ordered the black and I immediately liked the look and feel. Put it through a break in period, and eventually the blades, (the serrated & straight) were able to be opened one handed. The locks for the external tools, (the two blades, file and saw) feels solid, and so far, I've had no issues. The finish is already wearing at certain contact points, meaning its some sort of paint/coating, instead of a true stonewashing of the metal, which is a bit of a disappointment. The pliers open and close without a problem but folding it closed and unfolding it open is difficult and stiff, even after opening and closing several hundred times. What I dislike about the most is the interior tools in the handle are difficult to pull out individually and feel cheap. The scissors are ok, but the two flat head drivers feel like they'll break. I do like the bit driver, as it takes standard bits. The hard wire cutters will cut through bailing wire, although you need to wiggle the wire for it to separate. Haven't tried to cut anything else yet. Haven't used the file or saw. This will never be mistaken for a Leatherman Wave+, but it's also 1/3 the price of one as well. Overall, a decent tool for the price, but for $10 more, I'd recommend the Ozark Trail from Walmart.

Works great for a budget multi tool

A truly well machined 90 percent copy of the wave plus. Grip is the same, rounded and comfortable. Socket screwdriver is full size standard hex, snap in, it is better than the wave flat screwdriver special socket. This I think is it’s best feature as you can buy any standard drive head accessory to fit it. Both knives are perfect copies and as good. Small eyeglass screwdriver isn’t a socket like the wave but is very good and well machined. Pliers are exactly the same as the wave including the replaceable cutter edge. The only issue is that the plier handles don’t snap in place as securely as the the wave. The scissors are good but quite a bit looser than the wave and not as well designed. There is one often overlooked item which makes a big difference, the pull out lanyard eyelet in the wave which is pretty awesome and useful isn’t available on this unit. Last but not least, the file is awesome, one side is diamond coated and is fantastic for sharpening knives. The other side is a standard metal file for cutting the bars on the jail cell window when needed.