2" Multiple Angle 0-25 Degree 2 Piece Glue Fit Elbow Pipe Fitting, Schedule 40 (White)

On our golf course, most repairs involve dealing with deflection, or the bending of the pipe as it is installed. [without digging considerable pipe length] Pipe does not tend to align properly, and the repair fittings are under stress from said alignment issues, which has led to unsuccessful repairs. Especially at the high flow/PSI the systems operates at (130, and 170 psi)This fitting has greatly improved our ability to manage the deflection properly, which has made for more secure and successful repairs. It allows for the slightest of pipe angle changes to be overcome.Dry fit is difficult. Buy an extra, sand the pipe walls slightly, and use it as an alignment aid for the fitting you will eventually install.

I would give this 10 stars. The ability to dial in the angle you need in a piping system is immeasurable. This was used in my pool piping to match a new pump configuration that would not line up.

I was a bit unsure if this could actually do what was described, but it works great. I had an awkward situation that needed a unique solution and this worked perfectly. Simply dial in the angle you need and problem solved. What a great product. Saved my…uhm…project.

The fitting is useable. Does help with varying angle but ittle awkward to work with . It does the job if you allow lota room to work with

Used it for venting a condensing tankless water heater. The existing b vent was at a 10 deg angle. Used this to joint tank vent to the pipe that goes all the way to the b vent top cap. This way i avoided roof work, repurposing existing vent as a duct for the pvc pipe. See pic.

For the life of me I could not get pool plumbing to line up. Unions on filter are higher than heater. No 45 or 90 degree elbows could do the trick. These connections saved the day. I only wish I had them when I started the job. Would have saved me time, money, and a lot of frustration. 5 Stars!

This 2" pvc angle fitting is the answer to ALL of your weird angle's that are associated with pool piping and fitting....!

It is a bit hard to install in an existing system. My 2"elbow broke because the two pipes were not aligned. This allowed be to repair the system with very little digging and eliminated the stress that caused the original problem.