Efflorescence Remover is highly effective at removing general efflorescence build up on block paving and brickwork. The dilution rate of this product can be adjusted to suit the surface contamination and the procedure can be repeated if required. Not to be used on acid sensitive surfaces like marble, travertine, concrete, cement pavers, limestone and terrazzo. This product can also effect some metal surfaces like chrome etc including the vapours.Directions of use for Efflorescence Remover.Firstly, wet the surface to be treated with clean water.Apply to the surface using a low-pressure sprayer or mop. Can be used neat or up to a dilution rate of 1:10 with clean water.Allow around 10-15 minutes of dwell time, do not allow product to dry on the surface during this time.Agitate the surface with a stiff brush.Rinse the area with clean water.Repeat the procedure if required and increase the dilution rate if needed.Coverage:15m-30m² per litre dependant on dilution rate.Please Note:This product is acid based and is not to be used on any acid sensitive surface such as limestone, marble, cement-based pavers, travertine, terrazzo and concrete. It can also effect some metals including the vapours. Check the suitability in an inconspicuous area.ImportantSafety / PPE SuggestionsRubber gloves, protective eye-wear & face mask should be worn for safety.Warning: keep out of the reach of children.
Trustpilot
4 days ago
1 week ago
