Question 1

is it possible to change input names?

Accepted Answer

Changing the names is easy but you need to plan in advance how you intend to use the 8-letter allowance for each input.  For example, I started by trying to use “CD PLAYER” for Input 1 and came unstuck at the letter E.  Stupid, or what?  Eventually I settled for just “CD”!  Simple but effective!.  As others have stated, the renaming does not apply to the Phono (turntable) or BlueTooth inputs.  I’m not using a turntable, so I can only assume that the display remains as “PHONO” when it’s in use.  The BlueTooth input, however, produces a more informative display - “BLUETOOTH” when its selected, “PAIRING” when it’s hooking up with your external source device, and then the name of the external device once it’s connected.  It is truly brilliant and so quick and easy to connect.

Question 2

i what to plug 4 speakers into this amp you need mominal impedance of 12 ohms or highter i can only find speakers with 6 or 8  ohms can someone help

Accepted Answer

Hi, I assume that you're referring to 2 pair of speakers. In that case, you should bear in mind that the extra pair share the power coming out of this 2 channel amplifier. In other words this means both pair speakers will under perform. Multiple speakers to a single amp would be quite the opposite to a bridged amp system.

Short version:

Connect the first pair of speakers to connection A of  the amp and the other pair to B.
The impedance settings of the speakers should satisfy the condition given just blow (in simple terms the speaker impedance total should be more the the amp minimum figure for A+B.
Now select A+B after turning the power on of the amplifier (without this selection it'll be on A only as default). That's it.

The condition:

In your calculations of resultant impedance you'll need keep it above the safe limit specified at back of the amp. The speakers have lower and upper limits for the total (resultant) impedance of the speakers. That figure is normally given for example 4 ohm - 8 ohm. And you'll usually have a impedance selector at the back of the speakers. This selector can only be adjusted manually by hand or with a screwdriver.

Long version:
You'll only need this if you don't have A, B connections i.e. just one set of connections only.

So, if you want to connect them in parallel. The parallel connection will halve the impedance if both pair of speakers have equal impedance. But this will cause more current flow in the internal circuit of the amp which you should account for. For this type of connection you'll want set the speaker impedance to the higher figure.

The series connection on the other hand will double the impedance and significantly reduce the current flow in the amp. You'll want to set the impedance to lower figure.

Now, the parallel connection is such that each single speaker would be wired directly to the amp. And the series connection will run from the first speaker (connected to amp) to the second one.

Obviously, both of those situations are not ideal. So, you could instead use a selector box between the amp and the speakers. You'd then want to use a selector box with impedance balancing feature using variable impedance circuitry.

I see that you're trying to preserve sound quality with your intended connection as opposed to a surround amp with multiple channels but you'll be loosing out on speaker performance. Just like the say, you just can't win on all counts.

Have fun!!!

Question 3

When I switch on the amp, its lights come on immediately but the music takes 9 seconds  to come through. Is this is normal? Thanks

Accepted Answer

It’s a powerful amp,so I assume it’s to delay the pressure into the speakers,if for instance,you’d left the volume knob set high....mine is integrated with large speakers,Sky+box and TV and is on many hours a day,so I’m vey careful!

Question 4

Has anyone tried to connect a microphone and done the karaoke thing with this amp?

Accepted Answer

I don't think this would work as there is only a line level input for mp3 players on the amp. Also, the jack is only 2.5mm, I think mics use a 3.5mm jack.

Sony STRDH190.CEK 2 Channel Amplifier with Phone Input and Bluetooth - Black

Details

Description

Have a Question? See What Others Asked

Reviews

Common Questions