Creality Falcon2 Pro 22W Laser Engraver-Desktop Diode 120W Output with Integrated Enclosure, Camera&Air Assist for Batch Process, 500mm/s, Laser Cutter and Engraver Machine for Wood/Acrylic/Metal

Easy assembly. Fit mecpow laser. Fan works great.

I used a little wax and mineral oil lube to the poles and they inserted easily. I have heard complaints about the fan, but I think it works just fine. The large zippered opening allows for easy installing and removing the laser into the enclosure. I used 1/2 inch EMT clamps to hold the enclosure to the table so it doesn't slide around. This is a good product at a good price.

This enclosure is decent and gets the job done pretty well.I do wish that the exhaust ports were 4” and that would make it work much better.

Assembly was intuitive, but the instructions weren't clear for fan mounting (easy enough to guess based on pictures). All the parts were included in sealed plastic wrapping. Putting the fabric enclosure on over the frame was a little tricky (need to make sure you've pushed the poles all the way into the plastic corner pieces). Fit's snugly and the Velcro secures the enclosure to the frame.Enclosure is open on bottom so it's pretty easy to pick up and set down over laser machine. Gaps on bottom are small enough that smoke doesn't escape, but air can come in when the USB fan is on. It's easy to run cables through the holes installed, however I find running them under the enclosure is better since you can more easily pick up the enclosure to remove the material after a successful cut of a large piece of plywood.Note: There is no USB power adapter for the fan, and there is no lights inside the enclosure (some other products on Amazon have a light). I bought a simple USB light separately and wrapped the cable around the frame so it hangs and I can more easily see inside.Only concern is the clear screen doesn’t seem to filter out all of the blue light from the diode laser. I mostly got it for the fume control, so I still wear safety glasses when it’s running.

The open bottom is actually great for engraving on things larger than the laser. I read a comment where someone didn't like that it wasn't sealed on the bottom but I cut hdpe with it and the smell does not leak out. Which says alot. You won't regret it.

This enclosure is made of a metal tube structure with plastic angles, which supports the tent-like enclosure. There is no bottom part, the enclosure is more of a vent hood, a cube with 5 sides. There is a zippered front and top with colored vinyl window.The enclosure comes with an easy to attach USB powered fan and an expandable exaust hose.I bought it for my Elegoo Phecda, which is a bit larger than most; to my delight, it fits perfectly, even including the Geeks At Large camera boom. It does a great job at controlling smoke. While it’s great for a permanent setup, it’s not really what I would call “foldable” as you need to take the whole structure apart to fold it up. I added a couple of USB light strips to assist the camera.All in all, a good enclosure especially if you can leave it permanently in place. And it fits the Phecda! (Barely)

I have a similar enclosure for my Ender 3 so I thought I'd get one for my Falcon. I kept reading about the fumes and the smell and wanted to make sure that I wouldn't be affected by any of these things and was excited because it actually had a fan unlike the other enclosures that I bought. However there's one glaring and huge thing missing from this item...IT DOESN'T have a bottom, therefore easily let's out nasty smelling smoke and potentially harmful fumes from underneath the gap between the surface you rest your unit on and the metal polls.Granted it has a lot of things going for it The see through window is perfect and it does block the UV rays it has two openings for 3 inch fans one I use for the exhaust and one I use to blow air in to replace that that I'm taking out. It's very easy to get the unit in and out of, And with some minor modifications by hacking together foam base for the gaps, you can overcome it shortcomings fairly easily and cheaply.if I was purchasing again I'd probably try to find one with a base, but if this one is decently priced for you it definitely make for a great entry level enclosure.

My falcon2 pro 40 watt laser engraver arrived and to my surprise when I opened it,it was a previously owned and returned product missing necessary parts to even get it assembled. The return process was simple and a second laser was shipped out quickly. After assembling the to my computer because the usb-c port was missing completely. I have contacted Creality’s customer service but apparently they are closed for the next two weeks for Chinese new year. I realize this is not the fault of amazon but now I don’t know wether to return this one as well or wait till I hear back from the manufacturer. It is very disappointing to spent such a large amount of money for a product and have this kind of problem . I am now researching other brands to try and decide what to do. I’ve included a photo of the faulty circuit board where the usb-c plug should be attached.