SUNLU 3D Printer Resin, 3000g Fast Curing Resin Standard Photopolymer 3D Printing Liquid, 405nm UV Curing Resin for 4K/8K, LCD/DLP/SLA 3D Printer Resin, High Precision, Low Shrinkage, 3KG Black

I've use this resin for years now. I always pick it up on sale which it regularly is. I use it all year round, obviously it's thinner in the summer and thicker in the winter, but I never have a fail that isn't user error. My printing area drops to 13c in the winter but the models still come out great.

Having recently purchased a new printer I realised that my old resin was no longer any good, so I thought I would try out Sunlu's offerings!I'm using an original elegoo mars and an anycubic photon mono x and this resin prints well in both machines. With minimal tuning The prints from the ever dependable mars are great. And with the mono x I was very quickly able to drop from 0.05 layer height down to 0.02 with relatively few tweaks to my settings. I primarily print tabletop gaming figures and this resin is highly capable of accomplishing an adequate level of detail. In the photo attached to this review the model took a little over 3hrs to print at 0.020 layer height with bottom layer exposure at 12 seconds for 6 initial layers, then 0.8s exposure after that. The consistency of the Sunlu resin means that a good chunk of time can be saved by reducing the z retraction distance down to 4mm total leaving plenty of time for the resin to flow back under the print. I've yet to have any failures I can attribute to the resin only my eagerness to properly support models!

I'm a total beginner in the world of resin printing, but I had really good results with this Resin.Though I expected good results as the Sunlu PLA Filament has always given me good FDM resultsGreat product at a very good price

good stuff BUT its more of an off yellow than clear witch is the only thing wrong with it

My go to resin. Works a treat. So easy to clean, bye bye Elegoo brand.Wait until it is on offer. Sometimes the 2L bottles are cheaper than buying smaller amounts.

the best resin at a good price

Great product. No smell. Comes of plate easier than water washable resin for some reason. Reasonably strong when cured.

Haven't used Sunlu resin in quite a while due to it being unavailable in UK because of Brexit but its now available again and in 2000ml bottle. Great price and great detailed print...Chitibox default setting on printer.Will be buying again soon

My first bottle had this odd separation issue and it was difficult to figure out that was the cause of failed prints. It took me about half this bottle and trial and error to figure out the resin was the cause, i tested the same files with a different resin and they all printed perfectly (that was the abs like sunlu). The weird part is the fails and success' where almost random with the defective resin.After sorting out the issue I contacted the seller as I didn't think I would be able to get a refund or exchange (since I had to use so much during the diagnostic process) to see what we could do about this. They recommend that I request replacement/refund through Amazon regardless as this was an irregular issue and they asked for details from the bottle to run it to quality assurance for more research.Once I got the replacement it was a day vs night difference. Everything printed perfectly and without issue. seriously a great product both in size, quality, and price. The abs like is my favorite between these two but both are great products.Long story short is you have the separation issue send it back for a replacement, customer service is fantastic, and the product is amazing as long as you get a good bottle.

Drucke Modelle in 1:144 bis 1:160. Das Blau-Transparent ist dabei mein Standardresin. Hab schon viele Flaschen durch. Hab auch andere Resins probiert, aber keines liefert so scharfe Kanten und Konturen. Es ist auch bei normalen Zimmertemperaturen (20-22grd) recht dünnflüssig, kommt also gut unter die Druckplatte und wenn mal was abfällt, sieht man gut im Tank was los ist.Braucht für einige Modelle graues Resin (nicht transparent). Die Konturen waren wesentlich unschärfer. Hab dann ca. 15-20% fom tranparenten Resin zugemischt, Der Farbton wurde etwas blaustichig, aber weiter undurchsichtig, dafür sind die Details wesentlich schärfer rausgekommen. (Elegoo Mars 2P)

Resina de buena calidad, desprende poco olor y los fallos a la hora de imprimir son prácticamente nulos.

Print heel mooi, goeie details

Las piezas quedan preciossas y con buena resiliencia. Asumen bastante bien los golpes y el acabado es impresionante. Hice varios servilleteros que llevan tralla, y ni un leve desconchamiento en ninguno.