Note:1.Only one transmitter!2.Camera and battery are not included. Description: Don't want to be embarrassed in front of your client by fumbling among your devices? Don't want to be restricted to certain area and have your freedom confined? Then try this one! Specfically designed for Canon Camera,this TTL wireless flash trigger N1T-C provides you with multi-channels in triggering,strong and stable signal transmission and fast reaction.This product is for working wirelessly with studio flash and camera flash. Specifications:Mode:M/TTL /OFF Support:HSS/FEC/FEL/AF Manually opened/Modeling Flash Mode/Multi Compatible with: Canon EOS cameras(E-TTL autoflash) 2.4G wireless transmissionModulation Mode:MSK In the GR grouping mode, 5(A/B/C/D/E) Channel:32 Transmission Distance(Max.):>100m Zoom Setting Adjust the flash's focal length through the transmitter Output Interface Use a PC cord; Synchronization delay set: Yes(0-10ms, use 100us as the unit) Wireless Shutter Release: Receiver can control camera shooting through 2.5mm syc port Firmware Upgrade Use the Micro USB to upgrade Memory Function Settings will be stored 2 second after last operation and recover after a restart Power Supply:2 * AA (Not included) Package Content:1 x N1T-C TTL Wireless Transmitter
J**T
Doesn't work with the neewer 600ex-rt (GN 60) for Canon
Purchased it for my multiflash hummingbird flash setup, it doesn't sync with the flashes I have so had to return it, product feels good and also aesthetically looks good on the camera, tried it with a friend's flash and works perfectly fine so not made for me. The instructions are a bit tricky to understand if you don't already know the flash setup, so be prepared to brainstorm your way through it. Otherwise the syncing is perfectly fine with compatible flashes. Rather then buying receiver for this I'll buy the YN E3-RT to sync my EX 600s .
M**E
Perfect with the Godox X system flash units
Works perfectly well to convert the Canon EOS ETTL II protocol to the Godox X protocol used by the TT flash units, the AD200 and AD600 studio flashes. It is small and isn't obtrusive when fitted on the hot shoe of the camera. It is better to make the adjustments through the camera interface as the small rotating wheel makes selection of channel and power a little tricky. If the transmitter and receiver are very close ( under 12 inches - 30cms) then sometimes the unit will not fire. Over this distance it works very well.
R**T
Very handy
It is what it is. Very handy talks very well with my canon 7D mark II. Much easier to set up than I thought. It connected very well with a 4 light set up.
Trustpilot
1 month ago
3 weeks ago
