GeeekPi Raspberry Pi 5 Metal Case with Official Active Cooler, Support PCIe M.2 NVMe SSD Shield Top X1001 / X1003 / X1000 / N04 / N05

Robust and good looking metal case for Raspberry Pi. Easy to install and good value. Accessing the power reset button is a bit fiddly, but that's a fault of the Pi design rather than the case.

Best deal for whoever looking for raspberry pi with case. Includes fan as well. Value for money.

Excellent case and the fan/heatsink is great, nice and quiet

This is a great and very sturdy case for the Raspberry Pi 5, and includes an official Raspberry Pi 5 active cooler.The case comes with a bag of fixings and a small screw driver which I used to assemble it. The bag of hardware is inside the case which is screwed shut, but you can easily fish the screwdriver out through one of the holes.You attach the Raspberry Pi to the case using the included brash stand-offs and screws. I particularly like this way of mounting the Pi to the case as it's very sturdy and gives it good clearance from the bottom of the case, which makes the holes and slots in the case easy to use.One of the things I particularly like about this case is how easy it is to access the SD card. On other cases I've used before it can be really fiddly to get the card in and out but with this case it's very easy. There's also a nice big hole to access the power button.The case has slots all of the way around it which I think are meant for ventilation, but if you wanted to wire something up to the GPIO pins you could easily use the vent holes as exit holes for the cables. There is also space on the case for another case fan if you wanted it.I'm very happy with this case - it looks good, is well made and seems to be very sturdy.

This is a great little case for Raspberry PIs, I'm happy with it.The installation took about 5 minutes and was easy. The images for the instructions are not ultra clear but there are only 2 or 3 steps so it's not hard to figure out. There are also a lot of extra screws included which is good if you lose some (they are very small). The best part is that it includes the screwdriver needed for installation.Beside this, the case is good, I like that it is completely flush with the ports, because other cases had caused me issues with this where cables wouldn't fit. Also very important, the microSD card is easy to remove because the opening is big enough. This is also always an issue with a lot of cases so I was happy to see it was not a problem here.The build quality is good, the case looks nice and it is sturdy.I think for the price (£21.99 at the moment of this review), given that it includes the official fan that costs £5, it is very good value, I can highly recommend it.

Looks to be an excellent well made case, comes nicely packed and with the added bonus of providing you with a small screwdriver. Comes with a Raspberry Pi official active cooler.

A sturdy case which fits the intended Pi5 and additional fan hardware. Three stars for the robustness of the metal case, unfortunately it seems to act as a shield for WiFi signals to and from the Pi which is a design flaw. If you are only going to use the Ethernet port for your network connection then it won’t matter, but I would avoid if you need to connect your Pi via WiFi.

This is a poor case. I've been using Pi's since MK2 and I'm used to their ways and generally high mechanical tolerances. The problems here are on the case. The MK5 does not fit. I needed bend the locator lugs just to get the video out and power to line-up properly. The SDCard slot is really tricky and the mounting holes don't line up. Alas I needed the Pi5 and cooler. I recommend something better.

Usei com um hat nvme. Os furos permitem circulação de ar e ajudam a arrefecer o sistema.Parece ser bastante resistente.

Questa è un'ottima custodia per Raspberry PiS, ne sono soddisfatto.L'installazione ha richiesto circa 5 minuti ed è stata semplice. Le immagini per le istruzioni non sono molto chiare ma ci sono solo 2 o 3 passaggi, quindi non è difficile da capire. Sono incluse anche molte viti extra, utili in caso di perdita (sono molto piccole). La parte migliore è che include il cacciavite necessario per l'installazione.Oltre a questo, la custodia è buona, mi piace che sia completamente a filo con le porte, perché altre custodie mi avevano causato problemi con questa custodia in cui i cavi non si adattavano. Un'altra cosa molto importante è che la scheda microSD è facile da rimuovere perché l'apertura è abbastanza grande. Inoltre, questo è sempre un problema in molti casi, quindi sono stato felice di vedere che non era un problema qui.La qualità costruttiva è buona, la custodia è bella ed è robusta.

Je pensais que c’était un gadget, mais pas du tout. Ce boîtier pour Raspberry Pi 5 est petit, qualitatif et vraiment solide. Le refroidissement actif se déclenche très rarement tellement les radiateurs font bien leur travail, ce qui le rend particulièrement silencieux à l’usage. Franchement, c’est un excellent produit, bien pensé et efficace.

Petit boîtier bien étudié pour acceuillir un Raspberry pi 5. Je recommande.

This case, bundled with the official Raspberry Pi 5 active cooler, is one of the best options out there if you want to protect your Pi while keeping it cool under load. I use my Pi 5 to run Docker containers (including Home Assistant and networking tools), and this setup keeps temperatures impressively low, even with sustained CPU activity.The case is easy to assemble, with clearly labeled parts and pre-cut access for all ports — GPIO, microSD, USB, and HDMI — all remain easily accessible. The build quality is solid, with a good balance between durability and ventilation.The official active cooler included is quiet but very effective. It fits perfectly into the case’s design and has made a noticeable difference in thermal stability compared to passive cooling solutions.If you're running services 24/7 or using your Pi 5 for more intensive tasks, this case + cooler combo is a fantastic, plug-and-play solution.