AIMEZO 71" W Standing Desk Frame, Dual Motor Electric Height Adjustable Sit Stand Desk Frame with 4 Memory Preset Button, USB Charging Port for Home Office (3 Tier Legs, White)

The media could not be loaded.  After an extensive search for a sit/stand workstation solution, I decided to purchase the AIMEZO. It's been a few weeks now and it's working out great! Operation is smooth and quiet, and it goes high enough for me (I'm 6' tall) with plenty of travel to spare.The desk comes in "forward" and "reverse" variants - this refers to the direction in which the legs telescope. Forward means the legs extend up from the floor. Reverse does just the opposite, and the legs descend from the bottom of the desk.I chose the AIMEZO for its dual-motors, 3-stage legs (allowing greater travel and more stability), and excellent reviews. It is not the cheapest option thanks to that extra motor, but I wanted something that wouldn't conk out after a few months.The desk is carefully packaged in a single box. The powder coat finish is excellent, and mine arrived without a scratch.Assembly was straight-forward. I was able to put it together by myself, but the legs are really heavy - they house the motors - so it's a job that could go a little easier with some help. Also, note that adjustable frame comes assembled for packaging, but you do need to take it apart to install the legs. The instructions don't explain this and it caused me a few minutes of head-scratching.My desktop is salvaged from the particle monster of a desk I used previously. It's 23.5" front-to-back, which is about as narrow as you can go before the mounting rails start sticking out past the edges.

When I purchased this, there were no reviews. That made me a bit concerned, especially since this model was priced less than comparable models from other vendors. Looking closely at the photos, it appears virtually identical to many of the other models- maybe there's some internal differences, since this one has a lower published load capacity (220 pounds) than some of the others- but 220 pounds sounds more than sufficient. This was also one of the few vendors to offer the frame in white- which was my preference.I must say, I could not be more pleased with this purchase. It comes very well boxed, with everything separated by pliable foam and hard cardboard corner protectors. The shipping box is extra thick and rigid. UPS will have to try real hard to cause damage. All of the metal work is very heavy and heavy-duty and finished in a quality gloss powder-coat. Assembly was easy and everything bolted together without the drama of misaligned parts or cheap threading/machining. I had the WorkPro Flex Collection 60" table from the big Office store, which is pretty thick and hefty. Took off the existing legs and repurposed some of the hardware (i used 6 of the bolt anchors that were embedded in the tabletop, drilled new holes using the new frame as a template, and screwed the anchors in), since I thought this would be more secure in particle board than the included screws. All of the cables are terminated with good-quality snap in connectors that easily attach to the control unit. The control unit itself can be screwed to the underside of the desk within the frame.Once upright and plugged in, it just works. Push the up button , and after a brief hesitation (<1 second) there's a click and it starts to whir and the table top goes up. Tabletop is even and the motion is smooth. Release the button and it comes to halt, also with a light click sound. It has 4 memory settings- and they are one-touch. I was worried about whether this model supported one-touch, since some others, you have hold the button until it's done moving to the memorized height. Memory movement can be cancelled by pushing any button- which is good, since I need to work on my cable management. Repeatability of the adjustments is spot-on. There is a digital display of the height in either inches or centimeters and a backlight comes on when a button is pushed.Stability of the tabletop is quite good. No objectionable wobble, even at the higher settings. It has four good-sized adjustable feet, which are hard to get to, since they are tucked under the base, which allows about 1/4" clearance to the floor. It would be nice if there was an included tool to make adjustments easier.Finally, it does come with 5 cable clips with 3M adhesive pads to manage some of the wiring. I'll probably be looking for a tray of some sort to minimize the number of wires going from my desktop gear to the UPS sitting on my floor.

After couple of weeks in use, very happy with it. Solid built, looking good, easy to assemble. It works great, quality of manufacturing very good. At the height very stable, no shaking. I used it for an older Ikea desk, 160x80cm. Highly recommended.

This is an initial review. I’ll update if I ever have trouble.These were packaged great for shipping. They are kinda heavy but that makes your desk stable.Assembly was easy. Like all products these days the instructions are poorly written but you’re mostly using the pictures.These look commercial grade and perform at that level as well. I would trust these over something you would get at a residential furniture store.The rest of this review will be about my specific setup. I used a hollow core (interior) door for the desktop. It’s a little larger than the specified size for a top for these legs. 32x79.To secure the legs to this hollow door I glued several pieces of 1x4 scrap to the door to provide secure places to screw to. The hollow core door is loud compared to any solid surface. The sound from the motors reverberates through the top.I put some places to attach the control box and a large power strip under the rear of the desk. With a standing desk you really want only one wire connecting to the wall/floor. This way everything moves up/down with the desk in a tidy fashion and nothing is damaged.I suspended my old desktop mid-tower under the top to keep cable management tidy and keep the top clear. Make sure you understand the knots you use if you suspend something like this with rope.Overall I’m very satisfied with these. You get a very high quality desk at a fraction of retail price. There are other alternative tops you could use as well. A 6ft section of laminate countertop or butcher block countertop. A solid door (although they are heavier).

Highly recommend as their customer service was awesome when I had an issue.