The CN166 basic unit has 14 Positive and Negative Terminals (Especially for those who don't like to solder). The input power can be connected either by wires, a 2.1mm DC plug or a 2.5mm DC plug, the input terminal will handle up to 15 Amps, the board can be used for DC voltages up to 24vDC & DCC. (The board can be used with higher voltages, however the resister should be removed to disable the LED) The LED will show Green if the Polarity is correct, Red if the Polarity is reversed by mistake or Orange if you are running a DCC system. Write on patch for board Voltage and Board No. There are 6 Fixing holes available. The fixing holes are 3.5mm diameter, and there are 6 on each board. 1 Conventional wires from an auxiliary power source, 2 A Power pack with a 2.1mm plug 3 A Power pack with a 2.5mm plug. The outputs are Positive & negative for each 2 way terminal block of which there are 14 individual outputs. These are ideal for powering Street Lights, House Lights, Building Lights, and so on. The board will accept any DC voltage or DCC voltage.
Trustpilot
3 weeks ago
1 month ago
