YESURPRISE Large 3D Frameless Wall Clock Modern DIY Wall Decoration for Living Room Bedroom Office (Black)

Not sure what all the negative reviews are about... I read a bunch before ordering this... I was hesitant with hearing the directions were horrible, the clock stopped working, ect.... Well let me tell you my experience... I got this item delivered in two days... Amazon prime...came packaged very well no damage or issues...the directions are listed on the side of the box and yes it's translated because one work was misspelled "bottom instead of button"... The directions were pretty simple and easy to follow... Simply open the two packages of numbers and carefully PPP out from the foam rectangles... Leave the clear protective plastic on the shiny numbers to avoid finger prints... Next I took the chrome clock mechanism and marked on the wall where I wanted it... Then I screwed a screw into my dry wall. I then taped the clock guide and ruler to the chrome clock mechanism and made sure that it was 12 noon exactly on top where the hole is in the clock mechanism. I hung it on the screw and used the ruler attached to point up and simply put the 12 letters on the wall... Do not push firm yet... Just gently put on wall after tearing the yellow paper off the back... In case you need to move it... I used a laser level light to make sure each number matched the height of the opposite side... Ie: three and nine match up level... Top of the 8 and top of 4 line up level... The 5 and 7 line up ect... I started at 12 and went around the clock 1.2,3,4,5,6,7,8,9,10 then last 11....i then had problems understanding how to hook the clock arms but after 4-5 min I figured it out... Put the little hand on first and push down till it's firmly locked and not flimsy and wiggly... Then put the big hand on and line both up at 12 noon... And screw on little gold nut to lock it in place... Put your battery in and keep turning the little plastic dial on the back to correct time... Then carefully place it on your screw on the wall... I used that little hole on top for the screw to sit in and make sturdy... Then watch your clock for an hour and adjust any numbers that you may need to... Once happy push the letters on the wall firm then peel off that plastic clear protective tape... And BAM... Perfect! I've had this up now for 24 hours and works and looks great! No noise to the clock either. Very happy with it hope it lasts and keeps working.

I was hesitant about a DIY clock but I wish I had purchased it earlier because it's great and looks beautiful.First, to those who are worried about your textured walls - don't it will stick!Those worried about it being to complicated - don't because here are step by step instructions.Super simple!1. Take everything out of the box. You should have all the numbers and 4 words, the round clock, the hands of the clock, a small white round hanger with 4 tiny nails in it and a round card stock type paper clock with a long measure type thing on it.2. now you need to decide where and how big you want your clock to be.3. Now after you have unpacked everything punch out the numbers and words. Do not forget to punch out the inside of the e's. Do not remove the sticky backs yet. Lay them aside.4. after deciding where the center will be it's time to hang the clock. I didn't use the included white round hanger with the four tiny nails. I opted to use a small nail. Whichever, hang the clock. The top of the clock has a groove cut out where the nail or the hanger hangs from. Now 10 cms below that is the center of your clock - mark that spot. Remove the clock and it's time to put on the hands.5. Remove the protective cover from each hand. Put the hour hand on first, take care when doing this so you don't bend the hands. I placed one finger on each side of the center and gently press down until it clicks into place. You will feel when it's in place, now the minute hand except it's spot isn't quite as low as the hour hand. At this time go ahead and put in your battery (not included). Set aside. 6.Take the circle cards rock thing and push out the center circle and the center circle. Place this over where you marked on your wall the center of the clock should be. Tape it in that spot - make sure the 12 is pointed straight up etc. Once you have this taped down in this spot it's all a piece of cake! Now, it's the easy part.7.Have you decided how big you want it? Take the long measure part attached to the circle you just taped down and line up the arrows and start at 12. This is where the word 12 will go.8.Now how big do you want it? I did mine at the 40cm. I cut it at the 40cm mark. Cut the measure thing at whatever length you want it at. Now place the numbers and words. I did not remove the back and stick them on the wall at this point I just taped the numbers up first in case I didn't like the size but you can skip that if you are sure about the size you want. Turn the measure piece and line up the arrows for the 1, do this all around the clock till all are in place. If you placed them on the wall - step back and look at your work! If you taped the numbers and letters- step back and make sure you like it. Then go back and remove the stickies and place the numbers and words and if not adjust them.9.After that, remove the plastic piece over the numbers and words and place your clock up on the wall. If you need to do any tweets no worries- you can remove the letter and numbers and place them again. Just be gentle. As for the placement of the words.. It's up to you, I've seen them done crosswise and lengthwise and both look good so do it your way.If you found my review helpful - please click helpful found below my review and if you have questions I did not answer feel free to leave a comment or go to my profile and email me. Thank you!!

The clock looks stunning on the wall but stopped working after 3 weeks. Don't know what to do and stripping them off the wall will leave paint patches. I think the handles are too heavy for the mechanism to handle the rotation. It's better to buy this product off the shelf with warranty in any of your local shops.

a little fiddly to put up but it looks great. we've had many compliments about it as it is a statement piece on the wall.

Looks fantastic so different really pleased

It was exactly as pictured. Instructions for assembling the clock were very clear which made it alot easier. Overall very happy with the product and have got loads of compliments on it. Really puts a finishing touch to the wall!

Time taken to assemble well rewarded. Stylish product which has already attracted favourable comments.