Fuel Injector Cleaner Kit 1000ML 150PSI Non-Dismantle Fuel Injector Tester,3 in 1 Fuel injector Cleaning Kit for Fuel System/Intake System/TWC Converter,Petrol Cars Injector Cleaner with 40” Oil Pipe

This product was great for cleaning out the fuel injectors, throttle body, and CAT. However they screwed on the regulator parts on too tight and had to take it apart to get it to work right. It worked like a camp.

Alright, I may have seen an even larger kit than this one, but for general automotive mechanics this set does give you a little bit of everything from Asian/European to Domestic vehicles. I've so far been able to use the AN fittings on an BMW to flush some B12 Chem Cleaner into the fuel line. Although I'm working with direct injectors, on non-operating engine cleaning I was able to create a jig with the injectors out of the car and ran the B12 chem cleaner flush with components borrowed from this kit. That's a big plus because I don't easily come across BMW fittings unless I pay big dollars to get the OEM tooling/adapter. For that alone this kit is well worth getting.I've also used this kit twice to run the angled spray through the intake duct for throttle body cleaning/modulation. After running it for 15 minutes, I checked the throttle flap, it surely does work well to clean the throttle body and the intake valves. Note that this is only applicable to cable driven throttle bodies, I haven't been able to deal with electronic throttle's using this kit. To do that one will need a console to talk to the ECU while the engine is running and modulate it on the spot. I don't have that much equipment to do so. So yeah, my review is very limited to doing some injector flushing on a BMW fuel rail and cleaning some throttle bodies on legacy cable-driven setup. I didn't have the opportunity to test other fittings and other variety of cars to yield a bigger review. But the whole thing works well, the bottle is very corrosion resistant; I've run carb spray and B12 chem cleaner in the can and so far none of the valves craps out or anything like that. The kit does appear to have quality parts to work with. I do highly recommend this kit for inclined mechanics looking for a kit that has a little bit of everything.

This is an excellent fuel injector cleaning kit. It is well made with clearly solid material. A few pieces were knocking around inside the case when I received it, which concerned me, but they were simply knocked loose during shipping. Nothing was broken inside.As far as functioning goes, it cleans well. It made a huge difference with my engine and saved me a ton of money.

This is an VERY complete injector cleaning set. My wife’s 2013 suburban had a slighty rough idle and after a complete tuneup it still had a small stumble, this was my last attempt before replacing all the injectors or removing them to send out for professional cleaning and it did the trick! No more stumble it idles and runs like new again! I had no idea that was possible to effectively clean injectors without removing them but I was proven wrong. Saved me hours of work and hundred of dollars. Highly recommend this kit!

I think that this is a must have for any automotive enthusiast. The main reason that I got this was because I found a good deal on some used injectors (don't judge) and I figured I would clean and flow test them before I put them in the car. The flow test didn't quite match up to the manufacturer specs so I cleaned them and the injectors were as good as new!

This is a very useful set for mechanics. Very good quality and great value.