ELEGOOSaturn 3 12K MSLA 3D Printer with 10" Monochrome LCD Screen Fresnel Collimating Light Source Voxeldance Tango Software Printing Size 218.88mm*122.88mm*250mm

As you can see from the photos the print quality is outstanding. I use Anycubic standard resin with it. Clear, clear green, and black. Fast print times.If there is a downside it's the fact that the factory FEP is crappy. Didn't last long and ended up with a bunch of cured resin on the screen. I had one with no screen protector. Took days with a plastic razor blade and acetone to get it all off. These prints were done after the mishap. The girls face was printed right in one of the affected areas and you can see she turned out great..02 layer height, and my post processing is denatured alcohol, hot water rinse and support removal. I sand support stubs off, and cure. No other surface treatment for smoothing. Light coat of automotive primer, and then Vallejo, createx, army painter, and citadel paints.

The media could not be loaded. FOLLOW UP: DeepleeDirect reached out to me and offered a full refund for the printer! That was way above and beyond of them. I said a working print plate would suffice and 3 days later it was at my doorstep. DeepleeDirect really did well in taking care of a defective print plate when Elegoo still hasn't responded.I started testing the printer with the print plate and it works flawlessly!THANK YOU DEEPLEEDIRECT!I bought this to replace my Saturn which killed itself with a pucker turned leak onto the lighting. Upon assembling this, I found that the print plate mounting hole is so large even when completely locked down it allows the print plate to rotate laterally 1/4 inch in each direction. This defect makes the printer completely useless.I contacted Amazon and they were very helpful, setting me up with all of my purchase info and the contact information to Elegoo. Here we are almost a week later and Elegoo still has not responded. Zero tech support for an obviously incorrect or defective part. I won't be purchasing from Elegoo again.

I was skeptical at first when I was researching this printer but i must say I'm pleasantly surprised. If you are new to resin printing or want a simple and easy to understand printer, this one is good for you. I got this as an upgrade from my Saturn as getting parts for the older printer was a pain.Pros:- Un-boxed, added resin and printed first try. Minimal setup.- Fast Print times, at least 2x as fast as a my Saturn and 3x as fast as my Mars- Decent print size- The Build plate's etched surface makes removing prints a breeze- Had no real problems with Zeroing the plate. (I don't trust auto-zeros, so I verified.)- Maintained Temperatures very nicely (I live in a desert though so take that with some salt)- Time-lapse made it easy to go back and see where and how my print failed.- Worked very well with default values of Elegoo and Anycubic resins, very little fuss setting them up.- Build Plate was very easy to remove and place back in place.Cons- All my FEP wear out at around 30-40k pulls despite the claim of making it to 60k- Camera is low quality, grainy and will suffer significantly from light glare.- Failure detection never worked for me.- When finished printing, the build plate raises only slightly making removal of the build a tad tight unless manually raised first.- No built in light, makes any time lapses after hours just black.- Takes up a larger work bench area due to the tilt top feature.- No Handle on Tilt Top.- Resin splashes a little and causes spots on the lid and area around resin tray/tank while printing.- The tilting resin tray/tank adds an extra layer of concern during cleaning. Do Not Let Resin Drip Down There.Not sure this is a con as much as a personal gripe, but I would of liked it much better if Elegoo did something better than the drip bib that comes with it. It does indeed catch the resin drips, but its flimsy and seems like an after thought. For an item that is essential to protecting the mechanisms of the printer during printer clean up and print removal, you'd think they could have given in more thought or at least sold cheap replacements for when the one that comes with it eventually gets damaged.TLDR:Good Printer For Medium Size Prints. Very Easy To Use. Follow Instructions. Expect To Replace FEP Sooner Than Advertised. Keep Clean.

Customer service was amazing. My first unit had a defective power supply and would not power on. They had a replacement at my door within 48hrs! When you stand behind your product that we'll, you will have my continued support. I was up and printing within an hour and first completed print 5 hrs later. It was successful and looks awesome. Washed and cured with their Mercury X bundle made it all very easy. Used Elegoo standard polymer resin with great results. Can't help but feel I instantly obsoleted my Creality CR10-S. As an HO scale model railroader, the possibities seem limtless. Wow, just Wow!Zero issues leveling, zero issues printing and it is very quiet. Screen interface was easy as was moving thru the menus. One note that hopefully you can learn from my mistake-make sure you tighten the two screws for the plate significantly after leveling. I did not tighten one enough and it moved on me while printing. Not a printer issue, but rather a human issue.

The printer can put out some amazing prints, and has genuinely given me the best prints of my life. The only thing preventing me from a 5 star review is the construction of the z tower, but this can be overcome by using a work around. If they would fix the construction around the z tower to stop it from tilting when homing, without having to invent your own work around, this would be the absolute best printer on the market, with the best price. Just be aware some printers will have a tilting z tower issue without implementing your own work around.

Honestly amazing, the quality of details which comes out, I have no words. Easy to setup and even before print. It’s fast, the delivery also was quick