LUYED 1200 Lumens Super Bright 3020 6-EX LED Auxiliary Back Up Camera Parking Reverse Light System.Patent Enhances Night Performance LED Tail Light Camera Illumination 6500K White for Car Automotive

These lights are CRAZY bright, I am shocked and so happy with the color temperature. They look amazing. Initially I had purchased 2 and both happened to be faulty (I’m guessing a bad batch) i contacted luyed and they quickly refunded my money which was great, but I still wanted to try these out so I decided to get another because I like their design and style, and WOW they didn’t let me down. I’m going to buy 6 more!The color temperature is PERFECT 5k they aren’t that gross 6k that has a slight blue hue to it. I like pure crystal white and these fall nothing short of it, they are so damn bright it’s hard for me to believe it haha.I can’t recommend these enough, I’m going to make a YouTube video on these, that’s how much I like them.MaxxxPayLoad is my YouTube channel I’ll be uploading after I order 2 more and install them.It should be in the next 2 weeks.

This light is amazing! I purchased it to compliment some LED underglow lights (xprite pickup bed lights with custom extension cables, 5 pods per side). I needed something to light the front of the trailer so nobody would put a shin into the hitch coupler at night. I mounted this to one of the battery support cross bars, facing forward, and tied it into the switch for my other under glow lights.This baby puts out some serious light! I'm now wishing I would have just bought 10 of these and used them for undercarriage lighting instead. I don't know how much power it draws but my 30 1.5 watt LEDs under the sides of the trailer run right alongside this unit without popping the 5amp fuse so draw can't be much.I installed 4" rather large LED flood lights on top of my rear RV bumper as backup lights and in hindsight, 2 of these mounted discreetly underneath the bumper would have done a similiar job. I may end up swapping for a pair of these if I have any issues with the flood lights.I did notice the metal housing gets rather warm during extended use whereas my other LED lights generate no heat at all. I like that the housing is metal but do worry about the heat buildup if run continously. We'll see how it holds up this camping season, but right now I'd shy away from mounting it to a wood or plastic surface just to be safe.

Pretty bright for such a small light and they can be installed out of the way. Reason for 4 stars is that the wires could be a little heavier. Extra care is needed striping wires back as they are very thin. Choose to solder the connections rather than use the provided inline splices for a more secure connection.

Install this on my 2011 Acura MDX and it works great. Now when i back up in the dark my screen is able to see more. Installation wasn't that hard for the MDX but the only thing is i wish the cable that came with the light was a little thicker. The thin cable made it harder to crimp the wires but overall not too bad. I did use both double sided tape and screws that came with it. The double sided tape is very strong but i just thought it would be more secure with the screws. The only bad side is, i had to drill two holes on the plastic housing on top of my license plate. Overall i would recommend this product.

im glad i found this in Amazon, didnt know they have something like this at first. Installation was super easy, tapped into the OEM reverse bulb and done. Hiding the wire took me longer for my RX330. Considering getting another one for my other car.

I wired it into the backup lights on the rear of a Acura MDX. It helped a lot since it points down unlike the OEM backup lights.

The fourth picture currently shows mounting tabs for screws but the light came without any mounting tabs. I'm skeptical about the adhesive holding up long term. Also the included splices didn't work whatsoever because the light's wires are tiny, maybe 28awg. The wires literally slide right through the forks in the splice so it's quite impossible those splices would ever work with these wires. C'mon, at least use 22awg wire, though it would cost a few cents more. So I had to solder the connections instead.Oh, the light is nice and bright.

After installing a backup camera on my Altima, I discovered that the OEM backup lights were on the dim side. So I looked for a solution.PROS:-Very bright. Even tho I'm using two, (1) would have probably been enough. These even help at Dusk.-Nice low profile. They are barely visible mounted at the top next to my license plate lights.-Not adjustable. This may sound like a Con, but I didn't want the extra height of an adjustable model nor worrying about the adustable bracket coming apart. For me, the low profile is great.-Did I mention how bright these are!?CONS:-Wires aren't very long. If your mounting location is on the body vs the trunk lid, and not too far from your Backup lights...you'll be ok. But I wanted to mount these on the underside of my license plate housing next to the license plate lights, which is on the Altima's trunk lid. And the wires had just barely enough length to reach the wiring going to the Backup lights on the body. 6' sounds like a lot of wire until you have to route it thru the trunk lid, past the hinge(leaving enough to flex with the movement of the hinge), and then back to the Backup light wiring near the fixture. I traced the wiring to as close to the hinge as possible, but it was just barely enough to make it. I would suggest adding 2-4' to the wiring provided with the lights. You can always shorten wire, but adding wire can end up being problematic in the future..-Power wires are very thin. I would prefer it if the wiring was a little thicker gauge. Would also prefer having a different kind of insulation. The wire insulation was difficult to safely remove due to the small gauge of the wires. It's a molded type vs a sheath style. In order to connect the wire to the Ground and Backup power wires, I needed to remove about 8" of insulation.-No Protective Grommet or Sealant where the wiring emerges from the light. There's just a hole where the wiring exits the light, thus alowing dirt and water to enter and the wiring to rub against the metal. Eventually either water or road vibration would cause a failure, so I sealed the hole with Outdoor RTV. This caused me a 24hr delay in installation to allow the RTV to fully cure.Overall, I love these lights. They work great, would buy again..even with the Cons. I've had them for 3 months now and no issues.

Merci

The first unit that i received had some damage to it. I contacted Luyed customer service, and sent them pictures of the damage, they took care of the problem. Very happy with Luyed customer service!! Thank You.The only cons is the thin wires. I had to put solder to the tips to make them thicker just to be sure of a good solid contact.Happy with purchase!

Very bright, perfect, but 2 units both stopped working in about a year. The photo shows something on the inside of the glass. The cable entry is at the back of the unit and does not appear to be sealed, a basic error for an exterior item at the back of a vehicle. Note the white around the cable entry. It now says "inside" for fitment which is ridiculous.

Bought these before and didn’t even last a year, and in colder climates it flickers

Tinted windows are great for keeping out the summer sun, but reduce visibility in the dark. Installed this on the license plate light bracket. Definitely lights up the area behind the car when reversing. Happy with the purchase.