LAMPHUS Off-Road ATV UTV Light Bar Mounts Mounting Bracket Mini Bar Clamp Kits [0.75"/1"/1.25" Inch] [Horizontal Bar] [Aluminum] [2 Unit] Bull Bar UTV Roll Bar Clamp Tube Roll Cage Clamps Mount

picked these up to mount some auxiliary lights on my motorcycle crash bars and they are holding up great after a bunch of miles on rough roads with zero movement. the adjustable rubber inserts are a nice touch since you can get a secure fit on different diameter tubes without needing a completely separate product. lightweight aluminum construction and they have not slipped or shifted at all which is exactly what you want for something going on a moving vehicle.

I used this to make a side table to attach on the bar of my day bed. It worked perfectly! I like that the hole sizes are adjustable and come with different sized rubber rings to properly fit the bar its attaching on. I had to keep sizing up on the rubber ring to get it to fit! It was a tight squeeze and needed a lot of effort to get the screws to screws but it works and fits! If you put some weight onto the side table it does slip down, so just something to be aware of. But it was exactly what I was looking for and holds my drinks and food perfectly.

Used these mounts to hold off-road lights on my roof basket. Works very well, holds strong.

For $9 on a 2 pack these brackets fit my needs of adding auxiliary lights to the crash/engine bars of my motorcycle. There was only 2 issues with these, first was fixed with a bit of hardware store parts and know-how. The second was one of the set screws stripped the threading right out of the bolt. The 1st issue is the inner diameter of the mounting hole where you would fit a CB antenna, bolt from the light bracket, etc is 10.45 mm in diameter (used a micrometer on both to verify). This is HUGE when the application I was using this for was a M6 bolt (6 mm diameter metric bolt). Remedy for this was a rubber bushing as I couldn't enlarge the bolt size from the lights I'm using. $4 for new hardware to marry the 2 light to the 2 brackets. No biggie. The 2nd issue is partially my fault, but also the cheap bolt provided. The metal is SOFT. Since the mounting application was a crash bar there was an inner and outer bolt in relation to the mounting position. Tightening one 2 quarter turns (space limited) and 1 a half turn, alternating between them to keep them even. Once the distance between the front and back bracket was close to touching, the bolts obviously became harder to turn, but still relatively easy with a tiny allen wrench. Then the inner one became too easy, and I knew it was stripped. Considering a bracket is supposed to be clamped tightly to secure objects to rounded tubing, this is an obvious flaw. 2nd bracket I installed with much more care knowing how soft the bolts are. Advice for the manufacturer: Steel bolts, different sized mounting hole options or at least a better description of the dimensions. Overall I'm still satisfied. And will be ordering a replacement from the mistake.

I was searching for a suitable mount for Deanli Soundbomb horn to my Rocket 3 and stumbled upon this. I couldn't be happier with it. It's solidly built and still light weight. I had to put it together and take out several times to locate a suitable position on the bike for the horn. It still kept it shape at the holes and where the screw went in, tightened and came out several times. The included rubber teeth set is also of good quality. They grip well and do not destroy the paint. The Denali horn I mounted feels like more than 1 to 1.5 pound heavy. But this mount is still holding it well after several miles of ride on bumpy roads. For the price or otherwise, this is an outstanding selection. BTW, I had to reach out to he customer care and their services was excellent. Looked like they are based out of California. Highly recommended.

Sturdy better than expected but I will put in better screws later mount is great itself

they don't really fit 1.25" bars with the provided spacer everything else they are good quality and

These did the job , very strong hold on the round bar I was mounting my led pod lights to . It has 3) different sizes of rubber so you can change the mounting hole size , for different sizes of pipe or bar to which you would be mounting to . It's a strong hold but the rubber gives it just a little bit of a shock absorber so it doesn't jar the lights when your driving down a bumpy road , which is great an will save your lights . So all in all a great set of brackets .

Well made mounting brackets.

Needed 1 to hold a light, works great doesnt move once tightened

Bought these alloy mounts to replace the plastic ones that came with the aux driving lights I installed on my motorcycle a few years ago. I was tired of constantly repositioning and tightening the lights because of the cheap mounts they came with not holding well. These are great and could be used for many applications! Well worth the money

Ideal for mounting extra lights to my motorcycle crash bar. Enough fitment options to fit a variety of size tubes.

Well made mounting brackets.