SAMA IM01 Pro BKG Black Micro ATX Mini-ITX High Airflow Mid Tower Steel Metal Panel Computer Case Tempered Glass with USB3.0X2 Type C 1x120mm Silent Fan Pre-Installed

I was looking for a compact case mATX case that will fit into this crevice next to my media center. I didn't want to go ITX because of the limited options that provides. This case has it all! For one thing, once you have it fully assembled it looks super clean and beautiful. The case is completely vented (except for the tempered glass, of course). Every side of this case is mesh, so air flows through the whole thing. I managed to fit 6 case fans on this bad boy. The front, though, does not accept case fans because that's where you put the power supply. The power supply is mounted vertically, instead of above or below the motherboard like in most ATX cases. In my configuration, the intake is facing the interior of the case, and the heat is expelled downwards. The rest of the case fans are sucking from the bottom of the case and sending them out the top and back. Despite what the other reviewer is saying, routing the power cable is super easy. They provide a right angle power cable extender that you can route from the front of the case, behind the motherboard frame, through a channel on the edge of the case, and out the back. I guess the other reviewer never figured that out. My only gripe with this is that the extension cable sticks out the back, through a hole on the edge of the case, I wish there dedicated place to mount the extension, it would look so much cleaner. You can keep the end of the extension inside the case, but that means you would have to take a panel off to unplug the PSU. It's easy to take the panel off since they're held on by clips, but I rather not deal with that and it's the back of the case anyway, so who cares how that looks. This case is ridiculously configurable. Every mesh panels (front/sides/top/bottom) lifts off so that only the basic frame of the case remains. This makes it incredibly easy to install your components despite the case being so small. My favorite part is that I can flip the frame around and mount the motherboard upside down so that the GPU is at the top of the case and the heat can vent upwards out the top. In this case, you would snap the bottom panel with the rubber feet to the "top" of the case and flip it over. So many choices! The case is mostly screwless. Each of the panels are held on by clips. The snap off pretty easily if you pull on them from the back, but they're sturdy connections. Despite the small, size, you can fit a full size 330mm GPU (you need to make sure your PSU isn't too long though). The case also comes with an integrated GPU lifter to prevent sag. It can also fit full sized CPU fans. There is a removable section of the case that serves as a hard drive/ fan housing. I was able to mount 3 full size hard drives onto that caddy, and barely hard room to route wires to the PSU and motherboard, with some extra long SATA cables and SATA power cable extenders/splitters. It was tricky, but it worked! I think you were intended to mount hard drives to the bottom the main case instead, in lieu of case fans. But I wanted to put the hard drives in that caddy, and mount RGB fans where they would be visible through the tempered glass. In my build, the caddy has been mounted at the bottom of the case, and are under the case fans. The bottom panel w/ the rubber feet is mounted under that caddy. This is my server, and it has 3 hard drives mounted with single parity. You'll be hard pressed to find a case this small that can hold 3+ hard drives. If I want to mount more drives, I have the option to take the case fans out and mount additional drives in it's place. I've been building PCs for over 2 decades, and this has got to be my favorite case! It's compact, customizable, got excellent airflow, has tempered glass, can hold 3+ hard drives away from view, AND is under $100. You just can't beat this~! A+++ case, SAMA. Where have you been all my life?

Got this for 61 bucks on sale and it did not dissappoint

Case was super nice and well mostly well thought out except when it came to the power cable. Unlike most other reviews I got the US power cable but it was a flush mount cable that couldn't be flush mounted due to not having a hole cut for it. Instead there is a little cable channel that runs along the back of the case that causes the end of the passthrough to stick out super weird and pretty ugly. Instead I just skipped the power passthrough that was included with the case and just ran the power cable straight into the power supply and out the back of the case which looked a lot better. Also there is no mounting for 2.5in drives for some reason. Aside from those two things the case looks super nice, has great airflow, and was very well made.

First of all, it looks nice, it is able to be taken apart easily, BUT it said it could fit an ATX power supply of certain size and a GPUs certain size which I am both under in restriction of size and it still has trouble fitting. Shipping a separate power adapter was also annoying considering I had to wait a week and a half after receiving the case. I might edit this review if I make this setup work Got it to work, but the space still sucks. It looks good. I used the bad to carry the pc for the first time and it ripped. 3 of the rubber feet came off somehow with barely moving it… There are better options